F4000N_revD.pdf - 第60页
F4000N Series Operating Manual Section 5: Point T ype & Function Reference Part # 562187N - 1 Rev . D Sep 201 2 59 © 20 12 Fisnar Inc. 2.1.5 Dispense T i me T o use group edit to increase all of the dispensing times …
F4000N Series Operating Manual
Section 5: Point Type & Function Reference
Part # 562187N-1
Rev. D Sep 2012
58
© 2012 Fisnar Inc.
2.1.4 Line SP (Line Speed)
To use group edit to increase all of the line speed commands in memory address range
1 – 200 by 20 %:
Instruction
Display Shows
1
Press the F2 (MENU 1) key, then 1 to select
Group Edit.
The display will prompt the user to enter the
starting memory address of the group to edit
(From) and the ending number of the group to
edit (To).
GROUP EDIT
FROM: 1
TO: 1
(1 <-> 4000)
F1: All F2: End
2
Type 1 then press ENTER to register 1 in From.
Type 200 then press ENTER to register 200 in To.
GROUP EDIT
ADDR: 1-200
----------------------
1.Copy 5.Dispense Time
2.Delete 6.Offset
3.Move 7.Offset (R.E)
4.Line Speed
Select:
3
The Group Edit menu will then appear, allowing
the user to select an operation to be applied to the
range of points.
Press 4 to select Line Speed. Then press ENTER.
GROUP LINE SPEED
ADDR: 1-200
------------------------
Multiple Value:
4
The display will prompt the user to type the
Multiple Value to be applied to the line speeds.
For example, a value of 1.2 will increase all
speeds by 20%. A value of 0.8 will decrease all
speeds by 20%.
Type 1.2 and press ENTER to select a multiplier
of 1.2.
GROUP LINE SPEED
ADDR: 1-200
------------------------
Multiple Value:
1.2
1.Yes
2.No
Select:
5
The display will now prompt the user to confirm
the change. Press 1 to select Yes. Then press
ENTER
All of the line speed instructions in the select
range of points will now be multiplied by 1.2.
F4000N Series Operating Manual
Section 5: Point Type & Function Reference
Part # 562187N-1
Rev. D Sep 2012
59
© 2012 Fisnar Inc.
2.1.5 Dispense Time
To use group edit to increase all of the dispensing times (Point Dispense Setup) in
memory address range 1 – 200 by 15%:
Instruction
Display Shows
1
Press the F2 (MENU 1) key, then 1 to select
Group Edit.
The display will prompt the user to enter the
starting memory address of the group to edit
(From) and the ending number of the group to
edit (To).
GROUP EDIT
FROM: 1
TO: 1
(1 <-> 4000)
F1: All F2: End
2
Type 1 then press ENTER to register 1 in From.
Type 200 then press ENTER to register 200 in To.
GROUP EDIT
ADDR: 1-200
------------------------
1.Copy 5.Dispense Time
2.Delete 6.Offset
3.Move 7.Offset (R.E)
4.Line Speed
Select:
3
The Group Edit menu will then appear, allowing
the user to select an operation to be applied to the
range of points.
Press 5 to select Dispense Time. Then press
ENTER.
GROUP DISPENSE TIME
ADDR: 1-200
------------------------
Multiple Value:
4
The display will prompt the user to type the
Multiple Value to be applied to the dispense times.
For example, a value of 1.15 will increase all
dispense times by 15%. A value of 0.85 will
decrease all dispense times by 15%.
Type 1.15 and press ENTER to select a multiplier
of 1.15.
GROUP DISPENSE TIME
ADDR: 1-200
------------------------
Multiple Value:
1.15
1.Yes
2.No
Select:
5
The display will now prompt the user to confirm
the change. Press 1 to select Yes. Then press
ENTER.
All of the Point Dispense Setup instructions in the
select range of points will now be multiplied by
1.15.
F4000N Series Operating Manual
Section 5: Point Type & Function Reference
Part # 562187N-1
Rev. D Sep 2012
60
© 2012 Fisnar Inc.
2.1.6 Offset
The Offset function allows all XYZ locations in a program to be shifted in the X, Y, or Z-
axis by a user-defined distance.
To use group edit to add 15 mm to all X-axis values in memory address range 1 – 200:
Instruction
Display Shows
1
Press the F2 (MENU 1) key, then 1 to select
Group Edit.
The display will prompt the user to enter the
starting memory address of the group to edit
(From) and the ending number of the group to
edit (To).
GROUP EDIT
FROM: 1
TO: 1
(1 <-> 4000)
F1: All F2: End
2
Type 1 then press ENTER to register 1 in From.
Type 200 then press ENTER to register 200 in To.
GROUP EDIT
ADDR:1-200
------------------------
1.Copy 5.Dispense Time
2.Delete 6. Offset
3.Move 7.Offset (R.E)
4.Line Speed
Select:
3
The Group Edit menu will then appear, allowing
the user to select an operation to be applied to the
range of points.
Press 6 to select Offset. Then press ENTER.
GROUP OFFSET
ADDR: 1-200
------------------------
X Offset:0
Y Offset:0
Z Offset:0
Unit: mm
4
The display will prompt the user to type the X, Y,
and Z offset amounts to be added to all points in
address range 1 – 200.
Type 15 and press ENTER to add 15 mm to the
X-axis values. Press ENTER two more times to
leave the Y and Z offsets at zero.
GROUP OFFSET
ADDR: 1-200
------------------------
X Offset: 15
Y Offset:0
Z Offset:0
1.Yes 2.No
Select:
5
The display will now prompt the user to confirm
the change. Press 1 to select Yes. Then press
ENTER.
15 mm will be added to all of the X-axis values in
the selected range.