00192324-0302_MM_MTC1-MTC2_EN.pdf - 第13页
Preventive Maintenance MTC 2 Maintenance 10/2010 US Edition 1 MTC 13 1 For the cleaning to be performed during each sh ift you will require a garbage can and a vacuum cleaner . 1 1 : S top the placement process of the pl…
Maintenance Preventive Maintenance MTC 2
1 MTC 10/2010 US Edition
12
1.5 Daily maintenance work
1
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 1 MTC
13
1
For the cleaning to be performed during each shift you will require a garbage can and a vacuum
cleaner. 1
1
: Stop the placement process of the placement machine.
: Move both tower in the refill positions cassette 1.
: Open the cover and the protective door of the placement machine.
1
Vacuum the feed axes and the feeder modules 1
a Carefully vacuum the feed axes of the MTC and the tape feeder modules themselves.
There should be no loose components in the feeding area.
1
Pay attention to the crash light barriers in the process (see illustration on the left). 1
1
1
Emptying the waste container 1
1
s Pull the waste drawer together with the tape holder and reject box all the way out of the MTC.
d Remove the reject box from the side.
1
Pay attention to the tape reels. 1
1
1
: Empty the waste container into the garbage can.
: Vacuum out the area of the garbage can.
: Put the reject box back in and push the reject drawer back into the MTC until it engages.
1
Be careful of the tape reels when you push the reject drawer back in. If necessary, roll them back
up. 1
1
: Close the cover and the protective door.
: Exit the removal position.
: Press the Start button of the placement machine.
1
Maintenance Preventive Maintenance MTC 2
1 MTC 10/2010 US Edition
14
1.6 Weekly maintenance work
1