00192324-0302_MM_MTC1-MTC2_EN.pdf - 第25页
Preventive Maintenance MTC 2 Maintenance 10/2010 US Edition 2 MTC 2 25 2.1.1 Explanation of the symbols 2 2 T ools and consumable s required 2 2 2 2 Please note 2 2 2 2 Ti p 2 2 2 2 Caution 2 2 2 2 2.1.2 Basic rules duri…
Maintenance Preventive Maintenance MTC 2
2 MTC 2 10/2010 US Edition
24
: Always follow the safety and accident prevention regulations applicable in your country when
carrying out any maintenance work.
: Follow the safety instructions in the corresponding user manual.
: Pay particular attention to the special safety instructions in this chapter.
2
RISK OF BURNS 2
2
WARNING 2
2
WARNING
2
: Never use alcohol for cleaning purposes when working in the vicinity of a naked flame
or fire.
: Never spray lubricants or cleaning agents from aerosol cans in the vicinity of a naked
flame or fire.
: Do NOT smoke.
: Always wear safety goggles and gloves when using concentrated ethyl alcohol to
clean modules.
: If ethyl alcohol is accidentally sprayed in the eyes, immediately flush the eyes with
plenty of water.
: Operation of the MTC outside the SIPLACE placement machine is expressly prohib-
ited. There is a risk of severe injury and/or considerable damage to equipment if these
instructions are not followed.
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 2 MTC 2
25
2.1.1 Explanation of the symbols
2
2
Tools and consumables required 2
2
2
2
Please note 2
2
2
2
Tip 2
2
2
2
Caution 2
2
2
2
2.1.2 Basic rules during maintenance work
CAUTION NEVER use compressed air to clean inside the placement machine’s
modules. 2
Enter the maintenance work performed in the maintenance plan. We recommend that you adhere
to the order in which maintenance work is performed. 2
To save time while cleaning, perform the maintenance work on the SIPLACE at the same time as
the cleaning, complying with the safety instructions in the process. 2
2
2
2
2
2
Maintenance Preventive Maintenance MTC 2
2 MTC 2 10/2010 US Edition
26
2.2 Everything needed for maintenance
The following list of materials contains all the tools, equipment and materials required for main-
taining the MTC. 2
Always use ethyl alcohol for cleaning – do not use solvents. 2
Apply all lubricants sparingly and exactly where they are needed. 2
2.2.1 Tools and equipment
Have the following tools and equipment to hand before you start the maintenance:
2.2.2 Materials
Have the following consumables to hand before you start the maintenance:
2
2
2
2
2
2
2
2
2
Tools and Equipment From item number
Waste bin
Vacuum cleaner
2
Consumable materials From item number
Lint-free cloths
Ethyl alcohol
WD40, 400 ml 00325833-01