00192324-0302_MM_MTC1-MTC2_EN.pdf - 第21页
Preventive Maintenance MTC 2 Maintenance 10/2010 US Edition 1 MTC 21 Maint ain the component t able 1 a Clear the feeder area. : Use a vacuum cleaner to remo ve loose component s from the component table. s Use a whetsto…
Maintenance Preventive Maintenance MTC 2
1 MTC 10/2010 US Edition
20
1
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 1 MTC
21
Maintain the component table 1
a Clear the feeder area.
: Use a vacuum cleaner to remove loose components from the component table.
s Use a whetstone to remove any unnevenness on the magnetic bar.
1
1
d Use a lint-free cloth sprayed with WD 40 to protect the feeder area.
f Use a vacuum cleaner to remove any loose components from the tape container, and remove
any adhesive labels and tapes that are no longer needed.
1
g Cut the protruding used tape off flush with the feeder and empty the component drawer on
8mm S feeders.
: Place the feeder on the feeder area once more.
Make sure that the conveyor is in the right location and is connected correctly. 1
1
1
1
1
: Close the cover and the protective door.
: Switch the placement machine on at the main switch.
: Repeat these tasks in all the feeder areas.
1
1
1
1
1
1
1
1
1
Maintenance Preventive Maintenance MTC 2
1 MTC 10/2010 US Edition
22
1.9 Annual maintenance work
1
The annual maintenance work is to be performed by instructed service stuff. 1
1
1
: Inspection of the assemblies
: Greasing of the linear guides
1
1.10 Bi-annual maintenance work
1
The bi-annual maintenance work is to be performed by instructed service stuff. 1
1
1
: Change of lubrication system
: Change of batteries
: Inspection of toothed belts.
1
1