00192324-0302_MM_MTC1-MTC2_EN.pdf - 第22页
Maintenance Preventive Maintenance MTC 2 1 MTC 10/2010 US Edition 22 1.9 Annual maintenance work 1 The annual maintenance work is to be performed b y instructed service stuf f. 1 1 1 : Inspection of the assemblies : Grea…
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 1 MTC
21
Maintain the component table 1
a Clear the feeder area.
: Use a vacuum cleaner to remove loose components from the component table.
s Use a whetstone to remove any unnevenness on the magnetic bar.
1
1
d Use a lint-free cloth sprayed with WD 40 to protect the feeder area.
f Use a vacuum cleaner to remove any loose components from the tape container, and remove
any adhesive labels and tapes that are no longer needed.
1
g Cut the protruding used tape off flush with the feeder and empty the component drawer on
8mm S feeders.
: Place the feeder on the feeder area once more.
Make sure that the conveyor is in the right location and is connected correctly. 1
1
1
1
1
: Close the cover and the protective door.
: Switch the placement machine on at the main switch.
: Repeat these tasks in all the feeder areas.
1
1
1
1
1
1
1
1
1
Maintenance Preventive Maintenance MTC 2
1 MTC 10/2010 US Edition
22
1.9 Annual maintenance work
1
The annual maintenance work is to be performed by instructed service stuff. 1
1
1
: Inspection of the assemblies
: Greasing of the linear guides
1
1.10 Bi-annual maintenance work
1
The bi-annual maintenance work is to be performed by instructed service stuff. 1
1
1
: Change of lubrication system
: Change of batteries
: Inspection of toothed belts.
1
1
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 2 MTC 2
23
2MTC 2
2.1 Safety instructions
Abb. 2 - 1 Position of safety features
Legend
a Protective doors with protective door switches
s Emergency stop push-button
d Safety guard lifting axis (on both sides)
2
1
2
3