00192324-0302_MM_MTC1-MTC2_EN.pdf - 第7页
Preventive Maintenance MTC 2 Maintenance 10/2010 US Edition 1 MTC 7 1.1.1 Explanation of Symbols 1 1 T ools and expendable materials required 1 1 1 1 Note 1 1 1 1 Ti p 1 1 1 1 Caution 1 1 1 1 1.1.2 Basic Rules during Mai…
Maintenance Preventive Maintenance MTC 2
1 MTC 10/2010 US Edition
6
: During all maintenance work, comply with the safety and accident prevention regulations that
apply in your country.
: Follow the safety instructions in the User Manual.
: In addition, follow the special safety instructions in this chapter.
RISK OF COMBUSTION 1
1
WARNING 1
1
WARNING
1
1
: Never carry out cleaning work using alcohol near a naked light or flame.
: Never spray lubricant or cleaning agent from aerosol cans near a naked light or flame.
: DO NOT SMOKE.
: Always wear safety goggles and gloves when cleaning modules with concentrated
ethyl alcohol.
: If you accidentally spray ethyl alcohol in your eyes, wash your eyes immediately with
lots of water.
: The operation of the MTC outside the SIPLACE Station is not allowed.
Ignoring this instruction can cause injury and/or damage.
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 1 MTC
7
1.1.1 Explanation of Symbols
1
1
Tools and expendable materials required 1
1
1
1
Note 1
1
1
1
Tip 1
1
1
1
Caution 1
1
1
1
1.1.2 Basic Rules during Maintenance Work
CAUTION
Never use compressed air to clean assemblies inside the machine. 1
Record the maintenance work performed in the maintenance schedule. We recommend that work
be performed in the order indicated in the maintenance schedule. 1
To save time while cleaning, perform the maintenance work on the SIPLACE at the same time as
the cleaning, complying with the safety instructions in the process. 1
1
1
1
1
1
Maintenance Preventive Maintenance MTC 2
1 MTC 10/2010 US Edition
8
1.2 Everything needed for maintenance
The following lists of materials contain all of the tools, equipment and consumables required to
maintain the MTC. 1
Do not use any solvents for cleaning, just ethyl alcohol. 1
Just apply all lubricants sparingly and selectively. 1
1.2.1 Tools and equipment
Prepare the following tools and equipment for the maintenance work.:
1.2.2 Consumables
Set out the following consumables for the maintenance work:
1.2.3 Spare parts
Set out the following spare parts for the maintenance work:
Equipment Item no.
Garbage can
Vacuum cleaner
Whetstone / oilstone
Scissors
Consumables Item no.
Soft, lint-free cloths
Ethyl alcohol
WD40, 400 ml 00325833-01
Spare parts Item no.
Interlock WTC 00359419-xx