00192324-0302_MM_MTC1-MTC2_EN.pdf - 第24页

Maintenance Preventive Maintenance MTC 2 2 MTC 2 10/2010 US Edition 24 : Always follow the safety and accident preventio n regulations ap plicable in your co untry when carrying out any mainten ance work. : Follow the sa…

100%1 / 48
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 2 MTC 2
23
2MTC 2
2.1 Safety instructions
Abb. 2 - 1 Position of safety features
Legend
a Protective doors with protective door switches
s Emergency stop push-button
d Safety guard lifting axis (on both sides)
2
1
2
3
Maintenance Preventive Maintenance MTC 2
2 MTC 2 10/2010 US Edition
24
: Always follow the safety and accident prevention regulations applicable in your country when
carrying out any maintenance work.
: Follow the safety instructions in the corresponding user manual.
: Pay particular attention to the special safety instructions in this chapter.
2
RISK OF BURNS 2
2
WARNING 2
2
WARNING
2
: Never use alcohol for cleaning purposes when working in the vicinity of a naked flame
or fire.
: Never spray lubricants or cleaning agents from aerosol cans in the vicinity of a naked
flame or fire.
: Do NOT smoke.
: Always wear safety goggles and gloves when using concentrated ethyl alcohol to
clean modules.
: If ethyl alcohol is accidentally sprayed in the eyes, immediately flush the eyes with
plenty of water.
: Operation of the MTC outside the SIPLACE placement machine is expressly prohib-
ited. There is a risk of severe injury and/or considerable damage to equipment if these
instructions are not followed.
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 2 MTC 2
25
2.1.1 Explanation of the symbols
2
2
Tools and consumables required 2
2
2
2
Please note 2
2
2
2
Tip 2
2
2
2
Caution 2
2
2
2
2.1.2 Basic rules during maintenance work
CAUTION NEVER use compressed air to clean inside the placement machine’s
modules. 2
Enter the maintenance work performed in the maintenance plan. We recommend that you adhere
to the order in which maintenance work is performed. 2
To save time while cleaning, perform the maintenance work on the SIPLACE at the same time as
the cleaning, complying with the safety instructions in the process. 2
2
2
2
2
2