00192324-0302_MM_MTC1-MTC2_EN.pdf - 第18页
Maintenance Preventive Maintenance MTC 2 1 MTC 10/2010 US Edition 18 1.8 Bi-monthly maintenance work 1 1 2 2 6 7 3 1 4 5 a W affle p ack tray s W affle p a ck tray carrier (WTC) d Handle f Handle s leeve g Reinforcing st…
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 1 MTC
17
1
You will require the following consumables for the monthly maintenance work: 1
– Clean, lint-free cloths
– WD40 (item no. 00325833-01).
1
1
: Stop the placement process of the placement machine.
: Move the MTC into transport position in the menu "Mechanical functions".
: Open the cover and the protective door of the placement machine.
1
1
Oiling of the linear guides of feed axis 1
a Remove the two service caps in the belt cover of the feed axis by loosing the knurled screws.
s Push away the belt of the feed axis and moisten in this area the upper and side parts / ball
bearings of the linear guides with WD40.
a Fix the two service caps again with the knurled screws.
1
Pay attention to the crash lightbarriers during this process. 1
1
1
1
: Close the cover and the protective door.
: Exit the "Mechanical functions".
: Press the Start button for the placement machine.
1
1
Maintenance Preventive Maintenance MTC 2
1 MTC 10/2010 US Edition
18
1.8 Bi-monthly maintenance work
1
1
2
2
6
7
3
1
4
5
a Waffle pack tray
s Waffle pack tray carrier (WTC)
d Handle
f Handle sleeve
g Reinforcing strips
h Leaf springs
j Waffle pack tray interlock
a Interlock WTC (leaf springs)
s Top view to leaf springs
a
s
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 1 MTC
19
1
You will need the following tools, equipment, consumables and spare parts for the bi-monthly
maintenance work: 1
– Vacuum cleaner
– Oil stone
– Scissors
– Ethyl alcohol
– WD40, 400 ml (item no. 00325833-01)
– Interlock WTC (item no. 00359419-xx), if necessary.
1
1
: Stop the placement process of the placement machine.
: Move the MTC into the refill position 1 (basic position of the MTC).
: Open the cover and the protective door of the placement machine.
1
Checking the leaf springs of the WTC interlock 1
a Check each cassette to see if the leaf springs of the WTC interlock are against the side wall of
the cassette.
If they are not, either the WTC is not properly engaged or the leaf springs are faulty.
1
Use of cassettes with faulty leaf springs is prohibited. Faulty leaf springs must be exchanged (In-
terlock WTC (item no. 00359419-xx). 1
1
Checking the WTCs 1
s Check the WTCs for breaking (broken handles and handle sleeves, too), for loose or protru-
ding reinforcing strips and leaf springs and for a defect waffle pack tray interlock (see illustra-
tion).
1
1
Defect WTC are not to be used and must be replaced. Dont’t use WTCs which are obvious tighter
to push into the cassette or which are not to insert correctly into the waffle pack tray (defect
because of warp). 1
1
: Exit the refill position.
: Press the Start button.