00192324-0302_MM_MTC1-MTC2_EN.pdf - 第5页
Preventive Maintenance MTC 2 Maintenance 10/2010 US Edition 1 MTC 5 1M T C 1.1 Safety instructions 1 Fig. 1 - 1 Layout of the safety devices a Protective d oors s EMERGENCY STOP d Safety guard (to pr event operat or from…
Preventive Maintenance MTC / MTC 2
10/2010 Edition
4
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 1 MTC
5
1MTC
1.1 Safety instructions
1
Fig. 1 - 1 Layout of the safety devices
a Protective doors
s EMERGENCY STOP
d Safety guard (to prevent operator from reaching into machine)
f Safety guard lifting axis (not to see, other side on the bottom)
g Safety guard empty tape cutter
1
Maintenance Preventive Maintenance MTC 2
1 MTC 10/2010 US Edition
6
: During all maintenance work, comply with the safety and accident prevention regulations that
apply in your country.
: Follow the safety instructions in the User Manual.
: In addition, follow the special safety instructions in this chapter.
RISK OF COMBUSTION 1
1
WARNING 1
1
WARNING
1
1
: Never carry out cleaning work using alcohol near a naked light or flame.
: Never spray lubricant or cleaning agent from aerosol cans near a naked light or flame.
: DO NOT SMOKE.
: Always wear safety goggles and gloves when cleaning modules with concentrated
ethyl alcohol.
: If you accidentally spray ethyl alcohol in your eyes, wash your eyes immediately with
lots of water.
: The operation of the MTC outside the SIPLACE Station is not allowed.
Ignoring this instruction can cause injury and/or damage.