00192324-0302_MM_MTC1-MTC2_EN.pdf - 第23页
Preventive Maintenance MTC 2 Maintenance 10/2010 US Edition 2 MTC 2 23 2M T C 2 2.1 Safety instructions Abb. 2 - 1 Position of safety features Legend a Protective doors with pr otective door switches s Emergency stop pus…
Maintenance Preventive Maintenance MTC 2
1 MTC 10/2010 US Edition
22
1.9 Annual maintenance work
1
The annual maintenance work is to be performed by instructed service stuff. 1
1
1
: Inspection of the assemblies
: Greasing of the linear guides
1
1.10 Bi-annual maintenance work
1
The bi-annual maintenance work is to be performed by instructed service stuff. 1
1
1
: Change of lubrication system
: Change of batteries
: Inspection of toothed belts.
1
1
Preventive Maintenance MTC 2 Maintenance
10/2010 US Edition 2 MTC 2
23
2MTC 2
2.1 Safety instructions
Abb. 2 - 1 Position of safety features
Legend
a Protective doors with protective door switches
s Emergency stop push-button
d Safety guard lifting axis (on both sides)
2
1
2
3
Maintenance Preventive Maintenance MTC 2
2 MTC 2 10/2010 US Edition
24
: Always follow the safety and accident prevention regulations applicable in your country when
carrying out any maintenance work.
: Follow the safety instructions in the corresponding user manual.
: Pay particular attention to the special safety instructions in this chapter.
2
RISK OF BURNS 2
2
WARNING 2
2
WARNING
2
: Never use alcohol for cleaning purposes when working in the vicinity of a naked flame
or fire.
: Never spray lubricants or cleaning agents from aerosol cans in the vicinity of a naked
flame or fire.
: Do NOT smoke.
: Always wear safety goggles and gloves when using concentrated ethyl alcohol to
clean modules.
: If ethyl alcohol is accidentally sprayed in the eyes, immediately flush the eyes with
plenty of water.
: Operation of the MTC outside the SIPLACE placement machine is expressly prohib-
ited. There is a risk of severe injury and/or considerable damage to equipment if these
instructions are not followed.