00193922-01.pdf - 第20页
1 Introduction User Manual SIPLACE HF Series 1.3 Important notes on the user manual Software Version S R.505.xx 05/2004 US Edition 20 1.3 Imp ort ant notes on th e user manu al 1.3.1 Content s and fili ng of the user man…
User Manual SIPLACE HF Series 1 Introduction
Software Version SR.505.xx 05/2004 US Edition 1.2 General
19
All the menus and other information are available in two languages: You can choose between
the German and English versions. 1
The various headings contain information on 1
– our products
– services
– contacts, etc.
1
Registered customers can also access the SIPLACE User Group. There you can call up special
information on our placement machines, such as 1
– technical documentation
– technical information
– spare parts lists, etc.
1
Registering for access to the User Group is sheer child’s play: 1
Æ Click on the ‘Register now’ button
Æ Complete the registration form and just send it off.
You will then quickly receive access authorization with USER ID and a password. 1
1 Introduction User Manual SIPLACE HF Series
1.3 Important notes on the user manual Software Version SR.505.xx 05/2004 US Edition
20
1.3 Important notes on the user manual
1.3.1 Contents and filing of the user manual
This user manual contains basic information that must be observed when setting up, operating
and maintaining the machine. The service engineers, qualified staff, operators and users must
therefore read it before commencing installation and commissioning. The instructions must be
kept permanently accessible where the machine is used. 1
1.3.2 Qualification and training of personnel
Personnel used for operation, preventive maintenance, inspection and installation must hold the
relevant qualifications for the job. The user must keep tight control over their responsibilities, as-
signment and supervision. Any employee who does not have the relevant training must be
trained and given appropriate instruction. If necessary the user of the machine can have training
provided by the manufacturer/supplier. 1
In addition, the user must ensure that the employees have fully understood the contents of the
user manual. 1
1.3.3 User classification
The operating software is structured so that certain functions or menus can only by used or called
by appropriately trained personnel. There are three different classes of user: 1
– operator,
– line engineer and
– service engineer.
Access to each class may be password-protected. Chapters containing information for user
classes higher than "operator" contain a reference to the user class concerned in the footer. 1
Operators 1
The operator class consists of any person who has been trained in operation of the machine.
These people are authorized to use any functions associated with operating the machine and
may call up any menus needed to use the machine. 1
Line engineers 1
Line engineers have undergone special training and are authorized to carry out line engineer ac-
tivities, such as creating set-up configurations, determining vision parameters, etc. 1
User Manual SIPLACE HF Series 1 Introduction
Software Version SR.505.xx 05/2004 US Edition 1.4 Danger notes
21
Service engineers 1
This class is intended for engineers from SIEMENS. They are trained to carry out servicing work
and to upgrade and retrofit the placement system. 1
1.4 Danger notes
WARNING 1
– A thorough knowledge of the relevant part of this User Manual is required before carrying out
any work on the machine.
– All work must be carried out by appropriately trained and qualified personnel.
– All warning, caution and danger notes MUST be observed.
– In addition, read through chapter 2 of the user manual carefully.
1.5 Liability of the manufacturer/supplier
We draw your attention to the fact that this user manual only contains descriptive and explana-
tory material and does not include any contractual conditions or undertakings. All obligations of
Siemens AG proceed from the conclusion of the contract concerned, under which you have the
machine described herein. This applies in particular to all statements regarding performance or
service life and the agreed liability for faults or defects. The provisions of the contract regarding
the liability for faults or defect are neither extended nor restricted by any statements in this user
manual. 1