00193922-01.pdf - 第266页

6 Component handling User Manual SIPLACE HF Series 6.3 Component trolley Software Version SR. 505.xx 05/2004 US Edition 266 6.3.7 Support for the middle t ape reel for 3x8 mm feeders T ype 3 x8 mm S fe eders tran sport c…

100%1 / 358
User Manual SIPLACE HF Series 6 Component handling
Software Version SR.505.xx 05/2004 US Edition 6.3 Component trolley
265
6
Fig. 6.3 - 7 Compressed air supply for bulk case feeders
6
(1) Sealing plug on the component feeder table
(2) Component feeder table
(3) Compressed air supply for bulk case feeders
(4) Screw DIN 912, M8x20
(5) Retaining clamp
6 Component handling User Manual SIPLACE HF Series
6.3 Component trolley Software Version SR.505.xx 05/2004 US Edition
266
6.3.7 Support for the middle tape reel for 3x8 mm feeders
Type 3x8 mm S feeders transport components to the pick-up position on three tracks. The tape
reels for the two outer tracks are located between the dividing plates in the tape container. The
middle tape reel is arranged over the tape reels for the two outer tracks.
For the middle tape reels you will therefore also need:
– 1 adapter plate for holding the tape reel holder (item 1),
– 1 tape reel holder (item 2) for every two feeders, and
– 1 shortened idler pulley (item 3) for the tape reel holder at location 1 of the component feeder
table.
The adapter plate is fixed inside the component trolley with four fillister head screws, and the tape
reel holders are inserted into the square openings in the adapter plate.
6
Fig. 6.3 - 8 Support for the middle tape reel for 3x8 mm feeders
(1) Adapter plate
(2) Tape reel holder
(3) Idler pulley, shortened
User Manual SIPLACE HF Series 6 Component handling
Software Version SR.505.xx 05/2004 US Edition 6.3 Component trolley
267
6.3.8 Feeder fixing
The feeder fixing is an additional mechanical safety feature that prevents the conveyor acciden-
tally slipping on the component feeder table and excludes the risk of collision with the placement
head.
The conveyor fixing is fixed to the front of the component feeder table using screws. The claws fix
the feeder feet. One feeder fixing is required for every component trolley.
6
Fig. 6.3 - 9 Feeder fixing
(1) Feeder fixing
(2) Component feeder table