KE-3020_SPE_EN.pdf - 第38页

- 34 - 6. Compone nt suppl y unit (Optional) 6.1. List of Feede r Bank Specifications A bank is selected fr om five types show n below , which supplies component s. It is possible to combine w ith a f ro nt bank and /or …

100%1 / 63
- 33 -
4) I
FS-NX (Intelligent Feeder System) : Production management system
IFS-NX can use alone a software without the production support system.
It uses barcodes, 2-D codes and a multi-code reader to perform quality control operations
such as “prevention of a component placement error” and “traceability,” “improve the
workability of preparations” and “manage the number of the remaining components.”
To authenticate a feeder or a tray supply unit, you can select a barcode or an RFID.
When you use a component supply unit that supports an RFID, operation such as
verification and management can be automated, so that the quality control and working
efficiency are improved drastically.
* To use a function of IFS-NX, all of a mounter main unit, a feeder change trolley, eac
h
t
ype of feeder, and a tray supply unit have to support an RFID. If you use any
conventional device, contact our Sales staff.
* Refer to the “IFS-NX PRODUCT SPECIFICATIONS” for details of the IFS-NX.
5) IS Lite : Production support system
Juki software, the IS, has been simplified to develop the IS Lite. This softwar
e
consolidates and optimizes information on JUKI mounters allocated on the whole a line
(production site) to improve productivity and to reduce production cost of each line.
A
pplicable models : RX-6 series, RX-7, KE-3000 series, FX-3 series,
KE-2070/80 series, KE-2050/60 series
6) JaNets : Production support system
As with our software IS and IS Lite, This software consolidates and optimizes information
on JUKI mounters allocated on the several lines (production site) to improve productivity
and production quality and to reduce production cost of each line.
Applicable models : RS-1, RX-7, RX-6 series, KE-3000 series, FX-3 series, KE-2070/80
series, KE-2050/60 series, KD-2077
* For
line configuration that the RS-1 is located, JaNets is required.
- 34 -
6.
Component supply unit (Optional)
6.1. List of Feeder Bank Specifications
A
bank is selected from five types shown below, which supplies components.
It is possible to combine with a front bank and/or a rear bank according to your usage.
Bank type
Attachable feeder
type
Attachable feeder
exchange trolley
① Mechanical feeder bank fixed type Mechanical feeder
－
② Electric feeder bank fixed type Electric feeder
－
③
Mechanical feeder bank
feeder exchange trolley type
Mechanical feeder
Mechanical feeder
exchange trolley only
④
Electric feeder bank
feeder exchange trolley type
Electric feeder
Electric feeder exchange
trolley only
Mechanical feeder bank
feeder exchange type and electric
feeder bank feeder exchange
trolley shared type
Mechanical feeder
Electric feeder
Mechanical feeder
exchange trolley
Electric feeder
exchange trolley
6.2. Maximum Number of Feeders Available on a Mounter
1) Mechanical feeders
Feeder name
The number of
feeders available
on the front side
The number
of feeders
available on
the rear side
Total number
of feeders
available
The number
of slots
occupied
Mounting
pitch
8 mm tape feeder 40 40 80 (80 types) 2 17.0 mm
12 mm tape feeder
26 26 52 3 25.5 mm
16 mm tape feeder
26 26 52 3 25.5 mm
24 mm tape feeder
20 20 40 4 34.0 mm
32 mm tape feeder
16 16 32 5 42.5 mm
32 mm paper
adhesive tape feeder
16 16 32 5 42.5 mm
44 mm tape feeder 10 10 20 8 68.0 mm
56 mm tape feeder 10 10 20 8 68.0 mm
72 mm tape feeder 8 8 16 10 85.0 mm
Stick feeder type N 26 26 52 3 25.5 mm
Stick feeder type W 13 13 26 6 51.0 mm
Stack stick feeder
(Note 1)
5
―
5 8 68.0 mm
Bulk feeder 40 40 80 2 17.0 mm
Note 1: The number of feeders that can be installed on the front side is up to five.
- 35 -
2) Electric feeders
Feeder name
The number
of feeders
available on
the front side
The number
of feeders
available on
the rear side
Total number
of feeders
available
The number
of lanes
occupied
(Note 1)
Mounting
pitch
4 mm tape feeder
40
40
80 (80 types)
1
17.0 mm
8 mm tape feeder
40
40
80 (80 types)
1
17.0 mm
8-mm double tape feeder
40 40 80 (160 types) 1 17.0 mm
12-mm tape feeder
40 40 80 1 17.0 mm
16 -mm tape feeder
20 20 40 2 34.0 mm
24 -mm tape feeder
20 20 40 2 34.0 mm
32 -m tape feeder
13 13 26 3 51.0 mm
44 -m tape feeder
13 13 26 3 51.0 mm
56 -m tape feeder
10 10 20 4 68.0 mm
Stick feeder type N Note2
20 20 40 2 34.0 mm
Stick feeder type W Note2
13 13 26 3 51.0 mm
Note 1: One lane occupied by electric feeders is mostly equivalent to two slots occupied by mechanical
feeders.
Note 2: Attach the RF_ETF_ATTACHMENT when Stick feeders are used by a feeder trolley (RF)
3) Tray feeders
Feeder name
Dedicated
bank types
The number
of feeders
available on
the front side
The number
of feeders
available on
the rear side
Total number
of feeders
available
The number
of slots
occupied
Tray holder
Full type
For mechanical ― 2 2 42
For electric ― 2 2 42
Half type
For mechanical
―
4 4 21
For electric
―
4 4 21
DTS（TR-1SNR）
For mechanical
―
1(2-sheets) 1(2-sheets) 48
DTS（TR-1EB）
(Note 1) (Note 5)
For electric 1(2-sheets) 1(2-sheets) 48
MTS (TR-5SNX) (Note 1)
― ―
1
(40-stages) 1(40-stages) 80
MTS (TR-5DNX)(Note 1) ― ―
1
(40-stages )
(Note 2)
1(40-stages
(Note 2)
80
MTC (TR-6SNX),
(TR-6SXLX)
(Note 1 and 4)
― ― ―
20-stages
―
MTC (TR-6DNX)
(TR-6DXLX)
(Note 1 and 4)
― ― ―
30-stages
(Note 3)
―
Note 1 : These are dedicated feeders for KE-3020 and KE-3020R. TR-**R series models that have been used
with conventional mounters are not supported.
Note 2 : 40 sheets of 20 types in the nonstop mode
Note 3 : 30 sheets of 15 types in the nonstop mode
Note 4 : TR-6DXLX/6SXLX models are to be used exclusively for a mounter designed for XL-sized board. A
mounter for L-wide board does not support MTC.