3OM-1208-011_w.pdf - 第144页
3-57 AIVEDT -ID 2.4 Allocation of Component IDs 2.4.1 "Component ID List" Window When the "Component ID List Display" icon ( ) is selected in the "Pattern Program" window , the "Compone…
3-56
AIVEDT-ID
Table 3C3-2
Cutting and storing the selected unit in memory
When selected, this removes the selection (U data) and stores it in
the Clipboard.
Copying the selected unit
When selected, this transfers the selection (U data) to the Clipboard
without removing the selection.
Pasting the stored unit from clipboard
When selected, this pastes the cut or the copied U data.
Deleting the selected unit
When selected, this deletes the currently displayed U data.
Adding a new unit to the last one
When selected, this adds a tab (new U data) to the last one,
indicating that a new tab sheet is created.
Inserting a new unit before the selected one
When selected, this inserts a tab (new U data) before the currently
selected one, indicating that a tab sheet is inserted.
Adding the O-data to the selected unit
When selected, this adds the O data to the currently selected U data.
Delete O-data
When selected, this deletes the O data from the currently selected U
data.
Searching the data
When selected, this opens the "Search" dialog box.
Note
"*" (asterisk) and "?" (question mark) can be used as wild cards.
abc* : The search function retrieves the data which starts with
"abc".
a?c : The search function retrieves the data which starts with
"a" and contain "c" as the third character.
Enter the offset value in the selected line.
When selected, this makes it possible to collectively change the X, Y,
and Z values of the step No. selected in the placement data (P-data)
as much as the numerical values entered in the "Offset Entry"
window.
Open the "Symbol Data" window.
When selected, this opens the "Symbol Data" window.
Pattern Program Configuration
When selected, this opens the “Pattern program configuration”
window. The window enables you to select the [Disable] or the
[Enable] button to determine whether or not the data should be
checked before being saved.
Note
The [Enable] button opens a
"
Confirmation
"
window
when an error is found in the data to be saved.
0606-009
2.3 Icons
3-57
AIVEDT-ID
2.4 Allocation of Component IDs
2.4.1 "Component ID List" Window
When the "Component ID List Display" icon ( ) is selected in the
"Pattern Program" window, the "Component ID List" window opens.
[2]
[9]
[3] [4]
[5] [6] [7] [8] [1]
Fig. 3C45 "Component ID List" Window
Shown is the window of the component library for your reference.
This window is mainly used when the placement feeder location data must
be created.
[1] "List of Component IDs" Pane
A list of component IDs is displayed.
[2] Component Shape and T
ype
Select the desired component shape and type from the drop-down lists.
When the component types corresponding to the selected data are listed
in [1].
[3] "Fdr Width" Group Box
When an option button is selected, the component IDs corresponding to
the selected feeder width are listed in [1].
[4] "Component Library" Edit Button
When pressed, this button opens a "Component Library" edit window,
making it possible to edit the component library data.
Reference
Refer to "Chapter 4 Component Library" for how to edit the component
library data.
0606-009
2.4 Allocation of Component IDs
3-58
AIVEDT-ID
[5] [Link ID Tree Display] Button
When pressed, this button displays the link and root IDs that are
arranged side by side in the hierarchical (tree) file system.
[6] [Placement] Button
When pressed, this sets the component selected from the list of
component IDs in the placement feeder location data.
[7] [Replace] Button
When pressed, this button replaces the placement feeder location data
with the component selected from the list of component IDs.
[8] [Close] Button
When pressed, this button closes the "Component ID List" window.
[9]
[Search] Button
When pressed, this searches the required component ID.
(1) Enter the component ID to be searched, or using "*" (asterisk) and
"?" (question mark) as wild cards.
(1) (2)
Fig. 3C46
Example :
(a) When "AB*" is entered in the text box, all
component ID names starting with "AB" can be
searched.
(b)
When "*CD" is entered, all component IDs
ending with "CD" can be searched.
(c) When "AB?DE" is entered, all component ID
names containing any character(s) between "AB"
and "DE" can be searched.
(2) Press the [Search] button.
Only the component IDs that meet the requirements are displayed.
Note
To clear the results of the search operation
(1) Make blank the text box beside the [Search] button.
(2) Press the [Search] button.
The original condition resumes.
0606-009
2.4 Allocation of Component IDs