3OM-1208-011_w.pdf - 第182页
4-13 AKFEDT -ID 2. Editing of Component Library Data 2.1 "Component Library" Edit Window Select the desired component ID in the "Selection of component ID" window and press the [Open] button. The &quo…
4-12
AKFEDT-ID
[3] Attributes (Protect, Common, Std Id)
Displayed are the attributes of the selected component ID.
The check boxes enable the operator to change the corresponding
attributes.
"Protect"
When this check box is ticked, the component ID is specifi
ed as
"Protected".
When a component ID is protected, the data cannot be edited.
"Common"
When this check box is ticked, the component ID is specifi
ed as
"Common" (to be registered as a common component).
Note
The [Common] button in a "Component Library" edit window also makes it
possible to set the selected component as one to be registered as a common
component. Refer to "2.1 "Component Library" Edit Window" for details.
[4] [OK] Button
When this button is pressed, the changed attributes are applied if any
and the "Property" sheet closes.
[5] [Cancel] Button
The changed attributes are not applied and the "Property" sheet closes.
[6] [Apply] Button
The changed attributes are applied.
0606-009
1.2 Basic Operations in "Selection of component ID" Window
4-13
AKFEDT-ID
2. Editing of Component Library Data
2.1 "Component Library" Edit Window
Select the desired component ID in the "Selection of component ID" window
and press the [Open] button.
The "Component Library" edit window opens.
Fig. 3D9 "Component Library" Edit Window
Note
(a) When the "New" icon is pressed, a new window opens. Default
parameters are set in the new window.
(b) The displayed contents change according to the selected component
shape.
Fig. 3D10 "Component Library" Edit Window (New Data Creation)
Edit the component library data in each tab sheet.
0606-009
2. Editing of Component Library Data
4-14
AKFEDT-ID
Reference
Refer to "Component Library for GXH Series" for the description of the
component library data items.
Note
The standard component library data prepared by us cannot be edited.
Before editing the data in a file, give another name to the file and save it,
using the ( ) icon.
0606-009
2.1 "Component Library" Edit Window