3OM-1208-011_w.pdf - 第309页
6-76 AIVEDT -ID 0606-009 3.2 Nozzle Data When the "Nozzle Data" tab is pressed in the "Nozzle Data" window , the following tab sheet appears inside the window . Fig. 3F65 "Nozzle Data" T ab …
6-75
AIVEDT-ID
Nozzle Type Change Operation
(1) Select the nozzle ID in the address where the nozzle type must be
changed and press the icon ( ).
The "Nozzle Type" window opens.
Fig. 3F64 "Nozzle Type" Window
The line of the nozzle ID selected in (1) is highlighted in the "Nozzle
Type" window.
(2) Select the nozzle type to be allocated and press the [OK] button. The
source nozzle type is changed to the selected one.
Note
When a nozzle should be selected and "Unvisible" is set for "Visible flag"
in the "Nozzle Type Property" window, the nozzle will not be displayed in
the "Nozzle Type" list.
0606-009
3.1 Placement Head/Nozzle Data
6-76
AIVEDT-ID
0606-009
3.2 Nozzle Data
When the "Nozzle Data" tab is pressed in the "Nozzle Data" window, the
following tab sheet appears inside the window.
Fig. 3F65 "Nozzle Data" Tab Sheet
Fig. 3F66 "Nozzle Data" Tab Sheet
3.2 Nozzle Data
6-77
AIVEDT-ID
Fig. 3F67 "Nozzle Data" Tab Sheet
Fig. 3F68 "Nozzle Data" Tab Sheet
[Display] Button
When selected, this button displays only the nozzle types for which
"V
isible" is set in the "Visible flag" text boxes.
When the [Display] button is pressed to cancel the display, a list of
nozzles appears, enabling you to check only the nozzle types for which
"Unvisible" is set in the "Visible flag" text boxes.
[High] Button
When selected, this button displays only the nozzles for high-speed
components.
[Odd] Button
When selected, this button displays only the nozzles for middle-size
odd-shaped components.
0606-009
3.2 Nozzle Data