3OM-1208-011_w.pdf - 第59页

1-B AIVEDT -ID 0606-009

1-A

AIVEDT-ID

0606-009

Chapter 1

Scope

This chapter simply describes the data required for the

automatic operation of the machine.

•

Outline of Data

•

Outline of Pattern Program

•

Outline of Component Library

•

Outline of Management Data

•

Outline of System Setting

1-B

AIVEDT-ID

0606-009

1-1

AIVEDT-ID

0606-009

1. Outline of Data

In this machine, the following data is used.

Please fully understand the purposes of each data for better performance of

the machine.

Pattern Program (Chapter 3)

The component IDs in the

component library are used in the

pattern program.

Component Library (Chapter 4)

Management Data (Chapter 5)

System Setting (Chapter 6)

Fig. 3A1 Data Composition

•

Pattern Program

Pattern programs must be created for each PCB to be produced.

The automatic operation of this machine is controlled by these pattern

programs.

•

Component Library

This library stores data related to picks, recognition, and placement of each

individual component.

Reference

Refer to the instruction manual

Component Library (GXH Series)

for

the details of the component library.

•

Management Data

This management data contains "Management Data", "Pattern Program

Management Data", "Bypass & Rate Data", etc.

•

System Setting

This function enables the operator to set up various data such as the

machine system data, the nozzle data, and various types of machine

properties, etc., related to the system of the machine.