3OM-1208-011_w.pdf - 第266页
6-33 AIVEDT -ID 2.1.14 Nozzle Inclination Offset When the "Head [1/2]" tab is pressed in the "Device Offset" tab sheet and the "Noz. Incln" tab is selected, the following tab sheet appears. …
6-32
AIVEDT-ID
2.1.13 Head Inclination Offset
When the "Head [1/2]" tab is pressed in the "Device Offset" tab sheet and the
"Hd. Incln" tab is selected, the following tab sheet appears.
[1] [2]
[3]
Fig. 3F30 "Head Incln" Tab Sheet
Head 1, Head 2, Head 3, and Head 4
[1] Angle of HL incln Theta X [deg], Theta
Y [deg]
The set parameter is used to correct the deviations in the X and Y
direction that will be caused while the HL-axis is moving down if the
axis is tilted.
[2]
Angle of DD incln Theta X [deg], Theta Y
[deg]
The set parameter is used to correct the deviations in the X and Y
direction that will be caused while the HL-axis is moving down if the
DD-axis is tilted.
[3] Angle of optical axis incln [deg]
The set parameter is used to correct the angle of the component
recognition camera shot.
2.1 Device Offset Data
0606-009
6-33
AIVEDT-ID
2.1.14 Nozzle Inclination Offset
When the "Head [1/2]" tab is pressed in the "Device Offset" tab sheet and the
"Noz. Incln" tab is selected, the following tab sheet appears.
Fig. 3F31 "Noz. Incln" Tab Sheet
Nozzles 1 through 12
Head #1, Head #2, Head #3, and Head #4
Theta X [deg], Theta Y [deg]
Th
ese offsets are used to correct the deviations in the X and Y directions
that will be caused due to the inclination of the nozzle shaft while the
NL-axis is moving down.
2.1 Device Offset Data
0606-009
6-34
AIVEDT-ID
2.1.15 Head Rotation Correction Offset
When the "Head [2/2]" tab is pressed in the "Device Offset" tab sheet and the
"Hd. Rotate Corr. Head #1" tab is selected, the following tab sheet appears.
Note
A similar tab sheet will appear with the [Hd. Rotate Corr. Head #2], the
[Hd. Rotate Corr. Head #3], or the [Hd. Rotate Corr. Head #4] tab.
Fig. 3F32 "Hd. Rotate Corr. Head #1" Tab Sheet
Nozzles #1 through #12
DD An
gles 0 (+) to 330 (+) and 0 (-) to 330 (-), X [mm], Y [mm]
(Not
Available)
2.1 Device Offset Data
0606-009