3OM-1208-011_w.pdf - 第181页
4-12 AKFEDT -ID [3] Attributes (Protect, Common, Std Id) Displayed are the attributes of the selected component ID. The check boxes enable the operator to change the corresponding attributes. "Protect" When thi…
4-11
AKFEDT-ID
1.2.7 Property of Component ID
(1) Select the component ID to view its property.
(2) Press the [Property...] button.
The "Property" sheet opens.
[1]
[2]
[4]
[5]
[6]
[3]
Fig. 3D8 "Property" Sheet
[1] "Component ID", "Root ID", "Component shape", "Component
type", "Serial No.", "Update Time", and "Saved by"
Displayed is the property of the selected component ID.
[2]
Placeable Data (Unident., OK, NG, ?)
It can be displayed as log data to be checked if the machine (GXH
series) can place this component or not.
The check boxes can be used to change the function.
0606-009
1.2 Basic Operations in "Selection of component ID" Window
4-12
AKFEDT-ID
[3] Attributes (Protect, Common, Std Id)
Displayed are the attributes of the selected component ID.
The check boxes enable the operator to change the corresponding
attributes.
"Protect"
When this check box is ticked, the component ID is specifi
ed as
"Protected".
When a component ID is protected, the data cannot be edited.
"Common"
When this check box is ticked, the component ID is specifi
ed as
"Common" (to be registered as a common component).
Note
The [Common] button in a "Component Library" edit window also makes it
possible to set the selected component as one to be registered as a common
component. Refer to "2.1 "Component Library" Edit Window" for details.
[4] [OK] Button
When this button is pressed, the changed attributes are applied if any
and the "Property" sheet closes.
[5] [Cancel] Button
The changed attributes are not applied and the "Property" sheet closes.
[6] [Apply] Button
The changed attributes are applied.
0606-009
1.2 Basic Operations in "Selection of component ID" Window
4-13
AKFEDT-ID
2. Editing of Component Library Data
2.1 "Component Library" Edit Window
Select the desired component ID in the "Selection of component ID" window
and press the [Open] button.
The "Component Library" edit window opens.
Fig. 3D9 "Component Library" Edit Window
Note
(a) When the "New" icon is pressed, a new window opens. Default
parameters are set in the new window.
(b) The displayed contents change according to the selected component
shape.
Fig. 3D10 "Component Library" Edit Window (New Data Creation)
Edit the component library data in each tab sheet.
0606-009
2. Editing of Component Library Data