YSI_Prog_E.pdf - 第101页

2-30 2 Creating inspection pr ograms n Saving NG images V iew images for which NGs occurred during automatic inspection are automatically sa ved. By pressing the "NG Image" tab, a list of sav ed data appears. T…

2-29

Creating inspection programs

2.6 View settings

A "view" is the camera field-of-view used by the the inspection machine to inspect a board. In the view

settings, views are set for locations on the board to be inspected, and the board images for each view are

saved. When performing automatic inspection, the inspection head moves to the set coordinates to perform

inspection. View settings cannot be specified with the optional iPro offline software.

TIP

With the optional iPro ofine software, saved images are used to make changes to data. Furthermore, saved images

are also displayed in the Repair Station (option) OK images.

2.6.1 Saving view images

Capture all view images for the board set on the inspection machine, and save a standard image.

Press the [Data Edit] button and open the "View" tab.

Save the view image.

Press the image list [Save] button. The view registered first is saved as the standard image.

[Data Edit] – [View] screen

Saving the standard image

[Save] button

[OverWrite] button

View image

24227-P6-00

Save the inspection programs.

Press the [Save] button in the button area to save the board program.

NOTE

• If editing the view after saving the standard image, select the standard image from the OK image list, and then

press the image list [OverWrite] button.

• The saved image can be displayed by pressing the [List] button in the [Data Edit] - [Step] screen.

Saving additional OK images

If saving multiple OK images, after saving the standard image, replace the board and press the image list [Save] button.

The images are saved with the board ID for the saved date. To display saved images, press the [List] button in the "Step"

tab, open the "Image List" screen, select a board ID, and then press the [OK] button.

2-30

Creating inspection programs

Saving NG images

View images for which NGs occurred during automatic inspection are automatically saved. By pressing the "NG Image"

tab, a list of saved data appears. To display saved images, press the [List] button in the "Step" tab, open the "Image List"

screen, select a board ID, and then press the [OK] button.

Setting method

Press the [Machine] button to open a settings screen, select "Machine Information"

→

"Installation Setting", and select

"NG Image" from the "Image Setting" - "Image Auto SAVE" drop-down list.



When saving NG images, only those view images for which an NG has occurred are saved.

2.6.2 Using view images

Display a saved view image, and check the created inspection program or make changes to parameters.

Press the [Data Edit] button and open the "Step" tab.

Select a step.

Select the step to be checked from the step data list.

Press the [List] button and select a board ID.

By pressing the [List] button, an "Image List" screen appears. Select the board ID to be displayed from

the "Image List" screen, and press the [OK] button. The view screen changes to the selected image.

[Data Edit] – [Step] screen

Board ID selection

[List] button

View image

Select a board ID.

Select a step.

24228-P6-00

Change the parameter settings.

Make changes to the parameter settings so that test results are judged correctly. For details, see section

2.7, "Step settings", in this chapter.

NOTE

It is possible to set whether to inspect images registered in the image list at the multi-test "Test Condition Setting"

screen. For details on multi-testing, see Chapter 3, "2.4.1 Multi-test", in this manual.

2-31

Creating inspection programs

2.6.3 Creating all views and shortening inspection time

Change the view No. to automatically create views for data for which steps already exist, and to shorten the

inspection head movement time.

Press the [Data Edit] button and open the "View" tab.

Use the auto creation function buttons in the lower right of the screen.

Auto creation function buttons

24229-P6-00

[Auto] button

Allocates views to include all steps considering step position and size, and adds a view No. to minimize the axis

movement time.

[Tie] button

Creates views uniformly for the entire board.

[Sort] button

Changes the view No. to minimize the axis movement time.

[Fill Area] button

Adds and assigns views to areas on the board to which no views have yet been assigned.

NOTE

If editing views with the auto creation function, save the view images.