YSI_Prog_E.pdf - 第211页
5-6 5 Inspection machine settings 3. [EDIT] button T his section describes how to change the registered group name, operator names inside the group, and the oper ator level. A list of registered operators and operators r…
5-5
5
Inspection machine settings
1.3 Editing groups
This section describes how to rename or add a group, or add or delete an operator.
1
Press the [Operator Management] button on the Setup screen.
The "Operator Management" screen appears.
2
Press the [Group Setting] button.
The "Group edit" screen appears.
"Group Edit" screen
1
2
3
4
24504-P6-00
1. GROUP NAME, Heads
This shows a list of the registered groups and the number of operators registered in each group.
2. [INS] button
Pressing this button opens the following screen that allows you to add a new group. Enter the new group name in the
"GROUP NAME" box and press the [OK] button.
"Group Edit" screen
Enter group name.
24505-P6-00
5-6
5
Inspection machine settings
3. [EDIT] button
This section describes how to change the registered group name, operator names inside the group, and the operator level.
A list of registered operators and operators registered by default are displayed in the "EDIT OPERATOR" screen. Operators
with "Entry" check box selected belong to the selected group.
• To change the group name:
Enter a new name in the "GROUP NAME" box.
• If adding an operator to a group
Select the "Entry" check box for the operator to be added to the group. Clear the "Entry" check box for the operator to
be removed from the group. The same operator can be registered in multiple groups.
c
• To change the access level:
Click the "LEVEL" field to display a drop-down list, and select the level.
c
"Group Edit" screen
Select the group.
Enter a new name to
change the current
group name.
Select a level from the list that drops down.
Place a check mark next to
the operator you want to
add to the group.
24506-P6-00
4. [DEL] button
Use this button to delete a registered group. Select the group you want to delete and press this button. When a
confirmation dialog box appears, press the [OK] button.
n
NOTE
If an operator was only registered in the group you have deleted, that operator is automatically registered in the
"Operators" group that is registered by default.
c
5-7
5
Inspection machine settings
1.4 Editing access levels
This section describes how to set work levels for each type of work. The level can only be set by operators with
level equal to or higher than the work level.
1
Press the [Operator Management] button on the Setup screen.
The "Operator Management" screen appears.
2
Press the [Level] button.
The "LEVEL EDIT" screen appears.
"LEVEL EDIT" screen
24507-P6-00
3
Set the level for each item.
Select the applicable item, and set the level from the "LEVEL" field drop-down list.
Editing each item
Select the level.
Select item you want to set.
24508-P6-00
4
Press the [OK] button when setting is complete.
The display returns to the [Operator Management] screen. Press the [Close] button to close the screen.