YSI_Prog_E.pdf - 第45页

1-10 1  asic operation [Data Edit] – [Step] screen [T uning] tab 、 [Utility] tab 7 9 1 2 3 6 11 12 13 14 8 5 15 [T uning] tab [Utility] tab 4 10 17 16 24110-P6-00 Parameter Button name Description T uning 1 Step Perform…

100%1 / 226
1-9
1
asic operation
Item/button name Function
13 0.1mm
Pressing this button changes the pitch for the camera to move when the arrow buttons
on the scroll bars are pressed. (0.01mm, 0.100mm, 0.500mm, 5.000mm)
14 Foreign Disp
By specifying the number of divisions at [Edit Assist] - [?Deploy Foreign Matter Check?]
in the (Tuning) tab, created foreign matter check steps are displayed. Furthermore, steps
in the adjacent view appear in a yellow box.
[Data Edit] – [Step] screen
Parameter screens
2
1
3
4
5
Basic Light Detail
Detect Judge
OPtion
6
24109-P9-00
Parameter Item/button name Description
LIGHT
1 Light sampling Type Selects the method used to recognize the inspection object.
2 Light Detail Specifies detailed settings used to recognize the inspection object.
Detect 3 Area By pressing this button, the area inside the step is entered in "Std Area".
Judge
4 All Set Pressing this button also sets the selected offset in other directions.
5 OCR Reg. Registers an original character font for each user as the character recognition font.
Option 6 Mask Teach Moves the mask area, and changes the size.
TIP
For details on each parameter, refer to Chapter 3, "1. Parameters", in this manual.
1-10
1
asic operation
[Data Edit] – [Step] screen
[Tuning] tab、[Utility] tab
7 91 2 3 6
11
1213 14
85
15
[Tuning] tab
[Utility] tab
4 10
1716
24110-P6-00
Parameter Button name Description
Tuning
1 Step
Performs a continuous test of the selected steps, and displays the results.
Performs an inspection until the [End] button is pressed, and displays the test
results in the "Step" screen.
2 Parts Performs a test of all steps for the selected part, and displays the results.
3 Multi
Sets conditions for steps subject to inspection, and performs a test. (See Chapter
3, "2.4.1 Multi-test", in this manual.)
4 Result display Displays the test results.
5 End Ends the test.
6 Register Registers the steps for the selected part in the library.
7 Paste Pastes the selected library to parts on the step image.
8 Redeploy Deploys libraries to inspection data under the set conditions.
9 Edit Assist
Copies steps, adds pin Nos., deploys arrangement and pin information, and
deploys foreign matter checks. (See Chapter 3, "3 Edit assist", in this manual.)
10 Detail
All results can be checked when the test is complete. (See Chapter 3, "2.4.2
Measurement results", in this manual.)
Utility
11 Replace
Sets conditions, and replaces parameters for the relevant step at one time. (See
Chapter 3, "4.1 Replace", in this manual.)
12 Search
Set the type and character string for the inspection object at the "Search" screen,
and press the [Next Search] button to jump to the relevant step. (See Chapter 3,
"4.2 Search", in this manual.)
13 Light List
Displays a list of recognized images with the YAMAHA standard lighting settings.
Furthermore, new lighting settings can be registered, and lighting settings can be
set to steps.
14 Detail Displays details of the selected library.
15 Lib Out Outputs the library in text format.
16 Lib Non
Displays the "Library unset parts" screen, and displays steps to which no library
has been pasted in a list.
17 Data Check Checks for inconsistencies in inspection data.
1-11
1
asic operation
1.4.6 "Height Correct" screen (YSi-X)
Height is measured with a laser height sensor, and height is then corrected in order to perform X-ray inspection
correctly.
[Data Edit] – [Height Correct] screen
2
3
4
5
6
7
1
8
24111-P6-00
Item/button name Function
1 Board/Local
The unit for enabling the height correction function can be selected from board
or local.
2 Image size change
+ : Enlarges the height correction image.
- : Reduces the height correction image.
The image can also be enlarged and reduced by rotating the mouse wheel.
3 Change lighting
Changes the code scan image lighting. Select the lighting that results in the
clearest mark image from U, H, M, and L.
4 0.1mm
Pressing this button changes the pitch for the camera to move when the arrow
buttons on the scroll bars are pressed. (0.01mm, 0.100mm, 0.500mm, 5.000mm)
5 Trace Moves the camera to the mark list XY coordinates.
6 Teach Registers the current coordinates as the position coordinates.
7 Test
By pressing this button, the height of the position selected in the list is measured
and then displayed in the upper right screen.
8 Measure
Pressing this button and moving the mouse to the upper right screen displays
the XY coordinates and height.
TIP
Height correction performed locally becomes valid in view units, and is set in the "Height correct" field in the "View"
screen view data.