YSI_Prog_E.pdf - 第31页
i 1. Using this manual 1.1 A vailable manuals T here are several different manuals a vailable including this manual to help users use the mac hine effectively depending on their skills, expertise…
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Before using the machine
Contents
1. Using this manual i
1.1 Available manuals i
1.2 Manual contents i
2. Warranty ii
3. Contents of each chapter iii
4. Page layout iv
i
1. Using this manual
1.1 Available manuals
There are several different manuals available including this manual to help users use the machine effectively
depending on their skills, expertise, and applications. Available manuals are shown below.
n
Available manuals
Manuals supplied with machine
The following manuals are supplied with the machine you purchased.
This manual
Operator's Manual
Programming Manual
23000-P6-00
1.2 Manual contents
The contents of each manual are briefly explained below.
n
Contents of manuals supplied with machine
Operator's Manual Programming Manual
This manual is intended for machine operators. It provides
an overview of the machine and information necessary to
operate the machine.
This manual is intended for those who program inspection
data. It describes how to create and edit data needed for
machine operation and board inspection.
Before using the machine
Chapter 1: Part names and functions
Chapter 2: Basic operation
Chapter 3: Daily operation
Chapter 4: Maintenance
Appendix Specifications, option units, etc.
Before using the machine
Chapter 1: Basic operation
Chapter 2: Creating inspection programs
Chapter 3: Step screen
Chapter 4: Inspection status
Chapter 5: Inspection machine settings
Appendix List of keyboard shortcut keys
Software option manual (CD)
The manual for each software option for inspection
equipment is stored on the installation CD.
n
Repair station
n
Remote judgment station
c
ii
2. Warranty
The machine you have purchased is warranted against malfunctions as described below.
n
Warranty description:
If a failure or breakdown occurs due to defects in workmanship or materials used to manufacture this machine within
one year or 5,000 hours of operation (whichever comes first) after the incoming inspection is complete, then YAMAHA
will repair the defective parts free of charge.
n
Warranty period
The warranty period ends when any of the following applies:
1. After one year has elapsed from the time of installation.
2. After 5,000 hours of operation.
n
Items not covered by the warranty
The warranty does not cover any of the following conditions:
1. Damage as a result of deterioration due to age or wear (e.g., normal discoloration of painted or plated surfaces, wear
of replaceable parts, etc.).
2. Incidents associated with sensory perceptions which have no bearing on the quality or function of the machine (e.g.,
signal sounds emitted by the controller, rotating sounds of the motor, etc.).
3. Damage caused by the user environment (e.g., impurities in the air supply, dust, debris and oil mist in the machine).
n
Exception to warranty repairs
Warranty repairs will not be made if damage is caused by the following:
1. Earthquakes, typhoons, floods, lightning, accidents or fires, other natural or man-made disaster.
2. Modifications or conversions not approved by YAMAHA or its dealers.
3. Use of non-genuine parts, greases or lubricants.
4. Lack of proper maintenance and inspection procedures.
5. Maintenance handled by someone other than the approved dealers.
6. Damage or malfunction due to changes in the machine installation level that may be caused by changes in the
foundation or surrounding environment.
7. The machine was modified or changed in specifications after the incoming inspection is complete.
8. When defective parts replaced free of charge were not returned to the location specified by YAMAHA or YAMAHA
sales representatives within 30 days.
n
Note on network connections
A precondition for network connections with the YAMAHA machines is that such connections will be used in closed
networks comprised of this machine and an off-line PC. The customer must take responsibility for connections to
company in-house networks and to external networks. Please acknowledge that YAMAHA can bear absolutely no
responsibility for networks configured by other than this machine and off-line PC nor can accept responsibility for
problems occurring due to network settings and connections.