YSI_Prog_E.pdf - 第53页

1-18 1  asic operation 1.5.7 "Conveyor" screen Displa ys the current conveyor status. [Auto] – [Conveyor] screen YSi-12, YSi-X YSi-12 YSi-X 24119-P6-00 Item Applicable model Status Upstream side Busy Out YSi-1…

100%1 / 226
1-17
1
asic operation
1. [NG Reason] button
Changes the NG reason for NG steps.
2. [All NG] button
Judges NG for all steps judged to be NG by the inspection machine.
1.5.6 "Height Measure" screen
This screen exists when the machine is equipped with a laser height sensor. Displays the measurement result if
performing height measurement inspection.
[Auto] – [Height Measure] screen
24118-P6-00
1-18
1
asic operation
1.5.7 "Conveyor" screen
Displays the current conveyor status.
[Auto] – [Conveyor] screen
YSi-12, YSi-X
YSi-12
YSi-X
24119-P6-00
Item
Applicable model Status
Upstream
side
Busy Out YSi-12 YSi-X
Lights up green when outputting a board transfer permission signal to
the upstream machine.
BA In YSi-12 YSi-X
Lights up green when inputting a board unloading request signal from
the upstream machine.
Ent. Upper – YSi-X Lights up green when the entrance shutter is open.
Ent. Lower – YSi-X Lights up green when the exit shutter is closed.
Downstream
side
Busy In YSi-12 YSi-X
Lights up green when inputting a board transfer permission signal from
the downstream machine.
BA Out YSi-12 YSi-X
Lights up green when outputting a board unloading request signal from
the downstream machine.
Exit Upper – YSi-X Lights up green when the entrance shutter is open.
Exit Lower – YSi-X Lights up green when the exit shutter is closed.
Conveyor
Push Up YSi-12 YSi-X Lights up green when the push up is up.
Entrance,
Inspection, Exit
YSi-12 YSi-X Lights up green when the board is present at each position.
Inspection
result
Result OK YSi-12 YSi-X Lights up green when the board inspection result is "OK".
Result NG YSi-12 YSi-X Lights up green when the board inspection result is "NG".
1-19
1
asic operation
Item
Applicable model Status
Other
Stopper YSi-12 YSi-X Lights up green when the board stopper is closed.
Clamp YSi-12 YSi-X Lights up green when the board clamp is closed.
Edge Clamp – YSi-X Lights up green when the edge clamp is closed.
MS Board sensor – YSi-X Lights up green when the sensor at the main stopper detects a board.
MS Safety sensor – YSi-X Lights up green when the main stopper is down.
1.5.8 "Carry Log" screen
Displays events relating to board transfer during automatic inspection.
[Auto] – [Carry Log] screen
24120-P6-00