KE2040Instruction Manual Ver2.01,REV04.2003.6.25.pdf - 第31页
1 − 14 1.1.5 Electrical specif ications (1) Number of placement point s Up to 3,000 placement points can be def ined per pr ogram . For multi-mat rix PW Bs, up to 10, 000 points can be def ined, which is the number of ci…
1 − 13
(7) Air requirements
Air pressure : 0.49 ± 0.05 Mpa
Air consumption : 200 L/min.(ANR)
Dry air : Atmospheric dew point -17°C or lower
(8) Noise level
80dB
(9) Country of manufacturing
Manufactured in Japan
(10) Environmental conditions
Operating
Ambient temperature: +10° C to +35° C
Relative humidity: 50% or less (at 35° C)
90% or less (at 20° C)
Transport and storage
Temperature: -25° C to +70° C
Relative humidity: 20% to 95% (No condensation)
(11) Installation category: Installation category II (IEC664-1)
(12) Pollution degree: Pollution degree II (IEC664-1)
1 − 14
1.1.5 Electrical specifications
(1) Number of placement points
Up to 3,000 placement points can be defined per program.
For multi-matrix PWBs, up to 10,000 points can be defined, which is the number
of circuits multiplied by the number of placement points.
(2) Control Systems
Table 1.1.5.1
Item Control system Resolution
X-Y
Z
θ (MNLA head) *1
θ (FMLA head)
Closed loop by AC servo motor
Semi-closed loop by AC servo motor
Semi-closed loop by AC servo motor
Semi-closed loop by AC servo motor
0.005mm
0.00125mm
0.02°
0.005°
*1 :applicable to a KE-2020
(3) Main CPU
Pentium
(4) Display
Character display : 10.4" color (TTF liquid crystal display panel)
Graphics display : 9" monochrome
(5) Data and program input/output
A program which has been generated with an external programming device or
manually created from the keyboard can be input by means of a 3.5" floppy disk.
(2HD/1.44 MB type only)
When the machine is connected to a host line computer, the LAN interface
permits high-speed communications.
(6) Printer interface
Centronics interface
(7) Power requirements
Voltage : Three-phase, 200 V, 220 V, 240 V
(for Japan)
200 V, 220 V, 240 V, 380 V, 400 V, 415 V
AC
(for the machines to be exported)
Allowable voltage range: ± 10 % (for the rated voltage)
Apparent power : 3 kVA
Frequency : 50/60 Hz
Size of the primary-side power cable : 6 mm
2
or more
Size of the protective grounding lead wire : 6 mm
2
or more
(8) UPS
This machine is equipped with the uninterruptible power supply (UPS) to prevent
data from being damaged or lost due to power failure.
Batteries are used as the back-up power supply of the UPS, so the UPS is
designed to stop the system before these batteries run down. Therefore, even
during power failure, the system can be terminated safely so that any data cannot
be damaged or lost even when a power failure occurs.
1 − 15
1.1.6 Applicable components and packages
(1) Applicable component sizes (For laser recognition with a KE-2020 only)
Table 1-1-6-1
Item Specifications
Component height specifications 12mm
20 mm (option at the factory)
Head Laser recognition
(MNLA)
Laser recognition
(FMLA)
Laser recognition
(MNLA)
Laser recognition
(FMLA)
Min. 0.2 mm
0.3 mm 0.2 mm
0.3 mm Component height
Max. 12 mm 20 mm
Min. 0.6 mm x 0.3 mm
1.0 mm x 0.5 mm
0.6 mm x 0.3 mm
1.0 mm x 0.5 mm
Component size
(Length x Width)
Max. 20 mm x 20 mm
or
26.5 mm x 11 mm
33.5 mm x 33.5 mm
or
Length of a diagonal
line: 47 mm
20 mm x 20 mm
or
26.5 mm x 11 mm
33.5 mm x 33.5 mm
or
Length of a diagonal
line: 47 mm
Lead pitch Min. 0.65 mm
0.65 mm
0.65 mm
0.65 mm
Ball pitch Min. 1.0 mm 1.0 mm 1.0 mm 1.0 mm
Note:
Four nozzles can pick up components whose size is 10 mm x 10 mm or less
simultaneously.
Two nozzles (No. 1 and 3 or No. 2 and 4: one nozzle is skipped) can pick up
components whose size is larger than 10 mm x 10 mm simultaneously.