00197975-06_UM_TX-Serie_EN.pdf - 第109页
User manual SIPLACE TX-Series 3 Technical data and assemblies From software version 713.0 Edition 01/2020 3.1 Performance data 109 3.1.5 Board conveyor dat a for SIPLACE TX2i W 3 Flexible d ual conv eyor Dual conveyor in…
3 Technical data and assemblies User manual SIPLACE TX-Series
3.1 Performance data From software version 713.0 Edition 01/2020
108
3.1.4 PCB conveyor data for SIPLACE TX1/TX2/TX2i
3
Flexible dual conveyor Dual conveyor in "single
conveyor" (optional) mode
Board dimensions
(length x width
*a
)
50 mm x 45 mm to
375 mm x 260 mm
45 mm x 45 mm to
375 mm x 460 mm
Stationary conveyor side Outside
Right / right
Left / left
Outside
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 151
PCB weight
*b
Standard Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
PCB changeover time
Dual conveyor 1,3 seconds
*c
0 seconds
*d
*)a When using board widths > 375 mm, make sure that the peripheral modules can also process these board widths.
*)b The board weight value refers to the weight of the board plus the weight of the components.
*)c With the "Convoy Mode" option. Without this option 1.8 seconds.
*)d 0 seconds in synchronous mode
Important notes
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE TX-Series, be aware that there is limited room between the
two placement machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the two
machines.
To achieve top placement performance, fit the first machine in a SIPLACE TX-Series line with an input conveyor extension and the last
machine in the line with an output conveyor extension.
User manual SIPLACE TX-Series 3 Technical data and assemblies
From software version 713.0 Edition 01/2020 3.1 Performance data
109
3.1.5 Board conveyor data for SIPLACE TX2i W
3
Flexible dual conveyor Dual conveyor in "single
conveyor" (optional) mode
Board dimensions
(length x width
*a
)
50 mm x 45 mm to
375 mm x 280 mm
50 mm x 45 mm to
375 mm x 460 mm
Stationary conveyor side Outside
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 151
PCB weight
*b
Standard Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
PCB changeover time
Dual conveyor 1,3 seconds
*c
0 seconds
*d
*)a When using board widths > 375 mm, make sure that the peripheral modules can also process these board widths.
*)b The board weight value refers to the weight of the board plus the weight of the components.
*)c With the "Convoy Mode" option. Without this option 1.8 seconds.
*)d 0 seconds in synchronous mode
Important notes
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE TX2i W, be aware that there is limited room between the two
placement machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the two machines.
To achieve top placement performance, fit the first machine in a SIPLACE TX-Series line with an input conveyor extension and the last
machine in the line with an output conveyor extension.
3 Technical data and assemblies User manual SIPLACE TX-Series
3.1 Performance data From software version 713.0 Edition 01/2020
110
3.1.6 PCB conveyor data for SIPLACE TX micron
3
Flexible dual conveyor Dual conveyor in "single
conveyor" (optional) mode
Board dimensions (length x width) at place-
ment accuracy 20µm/25µm at 3σ
50 mm x 55 mm to
375 mm x 260 mm
50 mm x 55 mm to
375 mm x 460 mm
Board dimensions
a
(length x width)
*a
at place-
ment accuracy 15µm at 3σ
50 mm x 55 mm to
250 mm x 100 mm
n.a.
Stationary conveyor side Outside
Right / right
Left / left
Outside
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 151
PCB weight
*b
Standard Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
PCB changeover time
Dual conveyor 3,5 seconds
*c
0 seconds
*d
*)a Only with SIPLACE TX2i micron 15μm accuracy class and with C&P20 M2.
*)b The board weight value refers to the weight of the board plus the weight of the components.
*)c With the "Convoy Mode" option. Without this option 3.9 seconds.
*)d 0 seconds in asynchronous mode
Important notes
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE TX micron, be aware that there is limited room between the
two placement machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the two
machines.
To achieve top placement performance, fit the first machine in a SIPLACE TX-Series line with an input conveyor extension and the last
machine in the line with an output conveyor extension.