00197975-06_UM_TX-Serie_EN.pdf - 第119页
User manual SIPLACE TX-Series 3 Technical data and assemblies From software version 713.0 Edition 01/2020 3.4 Overview of the m odules 119 3.4 Overview of the modules 3 3 Fig. 3.4 - 1 Component overview - example of SIPL…
3 Technical data and assemblies User manual SIPLACE TX-Series
3.3 Dimensions and weight From software version 713.0 Edition 01/2020
118
3.3.3 Center of gravity
3
Fig. 3.3 - 4 Center of gravity in millimeters
Center of gravity S = 420 mm
User manual SIPLACE TX-Series 3 Technical data and assemblies
From software version 713.0 Edition 01/2020 3.4 Overview of the modules
119
3.4 Overview of the modules
3
3
Fig. 3.4 - 1 Component overview - example of SIPLACE TX2
(1) Location 1 with component trolley, tape cutter, empty tape duct
(2) Monitor at location 1
(3) Gantry at location 1 (placement head, depending on configuration)
(4) Gantry at location 2 (placement head, depending on configuration)
(5) Monitor at location 2
(6) Location 2 with component trolley, tape cutter, empty tape duct
(7) Board conveyor
(T) Direction of PCB transport
(1)
(3)
(4)
(6)
(2)
(7)
(5)
3 Technical data and assemblies User manual SIPLACE TX-Series
3.5 Placement head From software version 713.0 Edition 01/2020
120
3.5 Placement head
3.5.1 SIPLACE SpeedStar C&P20 P /C&P20 M2
3
There are two SIPLACE SpeedStar variants available for the SIPLACE TX-Series:
– SIPLACE SpeedStar C&P20 P for top placement performance
– SIPLACE SpeedStar C&P20 M2 for high-precision placement
CAUTION
Always take hold of the handle to push the placement head
The placement head may only be moved by pushing manually against the handle provid-
ed.