00197975-06_UM_TX-Serie_EN.pdf - 第14页
Contents User manual SIPLACE TX-Series From software version 713.0 Edition 01/2020 14
User manual SIPLACE TX-Series Contents
From software version 713.0 Edition 01/2020
13
7 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
7.1 Safety instructions for maintenance work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
7.1.1 Safety instructions for hazardous substances . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
8 Annex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
8.1 EC Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
8.1.1 SIPLACE TX1 (588001) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
8.1.2 SIPLACE TX2 (588002) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322
8.1.3 SIPLACE TX2i (588000) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
8.1.4 SIPLACE TX2i W (588280) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
8.1.5 SIPLACE TX2 micron (588502) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
8.1.6 SIPLACE TX2i micron (588500). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
8.1.7 SIPLACE TX2i micron 15 μm (588515) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
Contents User manual SIPLACE TX-Series
From software version 713.0 Edition 01/2020
14
User manual SIPLACE TX-Series 1 Introduction
From software version 713.0 Edition 01/2020
15
1 Introduction
This user manual is a guide or reference work for operating and setting up the SIPLACE
®
TX-
Series placement machines.
The TX-Series placement machines are available in seven different variants:
– SIPLACE TX1
– SIPLACE TX2
– SIPLACE TX2i
– SIPLACE TX2i W
– SIPLACE TX2 micron
– SIPLACE TX2i micron
– SIPLACE TX2i micron 15µm
The numbers in the type name indicate the number of gantries used. Each gantry has one place-
ment head. The term micron stands for enhanced placement accuracy of 20/25 µm or 15 µm. A
separate machine type is available for placement accuracy of up to 15 µm.
1
The header of each chapter contains the release and software version, to which this manual ap-
plies.
PLEASE NOTE
The SIPLACE TX-Series placement machines are of largely identical design. Any differ-
ences will be mentioned specifically.
For information about the relevant configurations and options, please refer to the
specification documentation for the SIPLACE TX or SIPLACE TX micron machines.
The diagrams in this user manual show the SIPLACE TX. These diagrams also apply in
principle to the SIPLACE TX micron. Additional diagrams will be shown for any devia-
tions.