00197975-06_UM_TX-Serie_EN.pdf - 第26页
1 Introduction User manual SIPLACE TX-Series 1.4 SIPLACE TX micron From software version 713.0 Edition 01/2020 26 1.4.1.1 Accuracy class 25 µm / 20 µm The SIPLACE TX 2 micron and SIPL ACE TX 2i mi cr on pl ac em en t m a…
User manual SIPLACE TX-Series 1 Introduction
From software version 713.0 Edition 01/2020 1.4 SIPLACE TX micron
25
1.4 SIPLACE TX micron
1.4.1 Description
In addition to the features of the SIPLACE TX, the SIPLACE TX micron placement machines also
demonstrate top placement quality for advanced packaging, high-volume production.
The SIPLACE TX micron placement machines are available in three different variants and two dif-
ferent accuracy classes:
– SIPLACE TX2 micron
– Placement machine with two gantries
– Table position "outside" at location 1
– Table position "inside" at location 2
– Accuracy classes 25/20 µm
– SIPLACE TX2i micron
– Placement machine with two gantries
– Table position "inside" at location 1 and 2
– Accuracy classes 25/20 µm
– SIPLACE TX2i micron 15 µm
– Placement machine with two gantries
– Table position "inside" at location 1 and 2
– Accuracy class 25/20/15 µm
The accuracy must be verified according to ASM guidelines, using the ACT (Accuracy Checking
Tool). See also the ACT user manual (item no. 00196351-xx)
The SIPLACE TX micron placement machines have one placement area and a dual conveyor.
Two boards can be placed at the same time on dual conveyors.
Three placement methods are possible for processing the components:
– Collect&Place,
– Pick&Place and
– A combination of Collect&Place and Pick&Place (mixed mode).
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions.
There are two locations available for supplying components. These can be fitted with component
trolleys and configured with up to 40 tracks.
1 Introduction User manual SIPLACE TX-Series
1.4 SIPLACE TX micron From software version 713.0 Edition 01/2020
26
1.4.1.1 Accuracy class 25 µm / 20 µm
The SIPLACE TX 2 micron and SIPLACE TX 2i micron placement machines facilitate placement
accuracy of 20 µm or 25 µm at 3
σ. The following components from the SIPLACE TX micron are
used:
– SIPLACE SpeedStar C&P20 M2
– SIPLACE MultiStar CPP M
– Highly rigid board conveyor
– High-resolution glass scales on the gantry and Y axis
– Additional fiducial rail in X direction for cyclical calibration of the placement machine
– SIPLACE Pro setting in the Component Shape Editor (placement accuracy => high =>
20 µm or 25 µm).
1.4.1.2 Accuracy class 15 µm
The SIPLACE TX2i micron 15µm placement machine facilitates placement accuracy of up to 15
µm at 3
σ. The following components and settings from the SIPLACE TX micron are used:
– SIPLACE SpeedStar C&P20 M2
– Highly rigid board conveyor
– High-resolution glass scales on the gantry and Y axis
– Additional fiducial rail in X direction for cyclical calibration of the placement machine
– SIPLACE Pro setting in the Component Shape Editor (placement accuracy => high =>
15 µm).
– Conveyor mode I-Placement
– Mechanical stabilization of board with additional vacuum tool and fiducial rail in the Y direc-
tion.
1
PLEASE NOTE
Vacuum tool with fiducial rail
The vacuum tool with fiducial rail must be produced according to ASM specifications.
User manual SIPLACE TX-Series 1 Introduction
From software version 713.0 Edition 01/2020 1.4 SIPLACE TX micron
27
1.4.2 Overview
1
Fig. 1.4 - 1 Vacuum tool on the SIPLACE TX micron - overview
(1) Vacuum tool at location 1
(2) Vacuum tool at location 2
(2)
(1)