00197975-06_UM_TX-Serie_EN.pdf - 第31页
User manual SIPLACE TX-Series 1 Introduction From software version 713.0 Edition 01/2020 1.5 Machine descripti on 31 1.5.2 EC Declarat ion of conformity The product descri bed i n this instruct ion m anual is in accordan…
1 Introduction User manual SIPLACE TX-Series
1.5 Machine description From software version 713.0 Edition 01/2020
30
1.5 Machine description
1.5.1 Placement machine serial number
The serial number of the placement machine can be found on the typeplate, on the inside of the
machine frame at location 1.
1
Fig. 1.5 - 1 Position of typeplate with serial number
(T) Direction of travel
(1) Typeplate
1
PLEASE NOTE
Electrical ratings on the typeplate
The electrical ratings on the typeplate are maximum values. The electrical power actually
consumed depends on the machine configuration and the placement program.
(1)
User manual SIPLACE TX-Series 1 Introduction
From software version 713.0 Edition 01/2020 1.5 Machine description
31
1.5.2 EC Declaration of conformity
The product described in this instruction manual is in accordance with the regulations and stan-
dards of the respective EC Declaration of Conformity. See also section 8.1
, on page 319).
1.5.3 Use as prescribed
The product may only be used for the areas of application specified in the catalogues and techni-
cal descriptions i.e. for the placement of SMD components and may only be used together with
the third party devices and components recommended or approved by ASM Assembly Systems
GmbH & Co. KG. Use for a different or extended purpose is not prescribed.
In the case of incorrect usage, ASM Assembly Systems GmbH & Co. KG will not assume liability
for any damage which occurs and will not guarantee the correct and proper function of machine
components.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
1 Introduction User manual SIPLACE TX-Series
1.5 Machine description From software version 713.0 Edition 01/2020
32
1.5.4 Failure to use as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, used other than as prescribed is expressly prohibited. In the case of in-
correct usage,ASM Assembly Systems GmbH & Co. KG will not assume liability for any damage
which occurs and will not guarantee the correct and proper function of machine components.
Use of the placement machine other than as prescribed includes, for example
– Operation of the placement machine with safety equipment deactivated or removed.
– Operation of the placement machine when the component trolley is missing or not docked.
– Placement of components that do not meet the permitted specification.
– Use of component feeder modules that have not been approved.
– Use of unauthorized accessories and additional modules.
– Use of the placement machine by unqualified personnel.
– Operation of the placement machine without the "dummy feeder" as hand guard at the loca-
tions, if not every location is occupied with a feeder module.
– Operation of the placement machine without a hand guard on the board conveyor.
– Unclear allocation of electrical connecting cables to each placement machine and the in-
stalled options.
– If there are two or more people standing at a component trolley location at the same time
during the retrofit.
– Persons standing on the cover plates and protective hoods.
– The use of wet cleansing tissues
1.5.5 Noise emissions
1
Max. noise emissions 75 dB (A)