00197975-06_UM_TX-Serie_EN.pdf - 第309页

User manual SIPLACE TX-Series 6 Station extensions From software version 713.0 Edition 01/2020 6.7 Stationary camera s 309 6.7 St ationary cameras 6.7.1 St ationary P&P component camera (type 25) 1 6 x 16, d igit al …

100%1 / 346
6 Station extensions User manual SIPLACE TX-Series
6.6 SIPLACE JTF-ML 2 From software version 713.0 Edition 01/2020
308
6.6.3 Technical data
6
Technical data
Width x length x height (tower) 374.5 mm x 322.7 mm x 707.0 mm
Width x length x height (conveyor) 356.2 mm x 346.0 mm x 68.2 mm
Weight Tower (empty): 26.3 kg (58.0 lbs.)
Total: ~36 kg (79.4 lbs.) (depending on applica-
tion)
Storage capacity
JEDEC waffle pack tray specification JEDEC Standard: 95-1 & IEC 60286-5
Waffle pack tray, thin 18 JEDEC waffle pack trays or
18 magazine trays (cookie trays)
(in two cassettes)
Waffle pack tray, thick (optional) 14 JEDEC waffle pack trays or
14 magazine trays (cookie trays)
(in two cassettes)
Waffle pack tray changeover time 3.15 to 6.1 seconds (depending on application
*a
)
*)a 3.15 seconds to the next waffle pack tray with maximum acceleration, 6.1 seconds from the first to the ninth
waffle pack tray with minimum acceleration
Slot n to n+1 3.15 to 5.4 seconds (maximum/minimum acceler-
ation)
Cassette
Width x length x height 343.7 mm x 136 mm x 137 mm
Max. load weight (per cassette 4.45 kg (incl. weight of cassette)
User manual SIPLACE TX-Series 6 Station extensions
From software version 713.0 Edition 01/2020 6.7 Stationary cameras
309
6.7 Stationary cameras
6.7.1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera)
Item no. 00588101-xx Stationary camera for the Twin head, type
6
Fig. 6.7 - 1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera)
(1) Camera housing with integral camera and camera amplifier
(2) Glass plate - illumination and lens levels below
6.7.1.1 Safety instructions
6
(1)
(2)
WARNING
Risk of collisions!
When changing the placement head from a TwinStar/VHF to a SpeedStar, the SpeedStar
collides with the camera housing.
Dismantle the stationary component camera for the TwinStar.
When changing the placement head from a TwinStar to a MultiStar, the stationary
component camera is fitted in the bottom position.
6 Station extensions User manual SIPLACE TX-Series
6.7 Stationary cameras From software version 713.0 Edition 01/2020
310
6.7.1.2 Technical data
6
Component dimensions 0.2 mm x 0.2 mm up to 16 mm x 16 mm for single component
measurement
Component range 0402 to SO, PLCC, QFP, sockets, plugs, BGA, special components,
bare dies, flip-chips, shields
Min. lead pitch 0.25 mm
Min. lead width 0.1 mm
Min. ball pitch 0.14 mm
Min. ball diameter 0.08 mm
Field of vision 19.4 mm x 19.4 mm
Illumination type Front-illumination (6 levels, programmable as required)