00197975-06_UM_TX-Serie_EN.pdf - 第111页
User manual SIPLACE TX-Series 3 Technical data and assemblies From software version 713.0 Edition 01/2020 3.2 Ambient condition s and connection values 111 3.1.7 Component supply 3.2 Ambient conditions and connection val…
3 Technical data and assemblies User manual SIPLACE TX-Series
3.1 Performance data From software version 713.0 Edition 01/2020
110
3.1.6 PCB conveyor data for SIPLACE TX micron
3
Flexible dual conveyor Dual conveyor in "single
conveyor" (optional) mode
Board dimensions (length x width) at place-
ment accuracy 20µm/25µm at 3σ
50 mm x 55 mm to
375 mm x 260 mm
50 mm x 55 mm to
375 mm x 460 mm
Board dimensions
a
(length x width)
*a
at place-
ment accuracy 15µm at 3σ
50 mm x 55 mm to
250 mm x 100 mm
n.a.
Stationary conveyor side Outside
Right / right
Left / left
Outside
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 151
PCB weight
*b
Standard Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
PCB changeover time
Dual conveyor 3,5 seconds
*c
0 seconds
*d
*)a Only with SIPLACE TX2i micron 15μm accuracy class and with C&P20 M2.
*)b The board weight value refers to the weight of the board plus the weight of the components.
*)c With the "Convoy Mode" option. Without this option 3.9 seconds.
*)d 0 seconds in asynchronous mode
Important notes
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE TX micron, be aware that there is limited room between the
two placement machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the two
machines.
To achieve top placement performance, fit the first machine in a SIPLACE TX-Series line with an input conveyor extension and the last
machine in the line with an output conveyor extension.
User manual SIPLACE TX-Series 3 Technical data and assemblies
From software version 713.0 Edition 01/2020 3.2 Ambient conditions and connection values
111
3.1.7 Component supply
3.2 Ambient conditions and connection values
3.2.1 Ambient conditions for packaging, transportation and storage
3
3.2.2 Ambient conditions for placement machine operation
3
Component supply Tracks occupied
SIPLACE TX / TX micron
With C&P20 P / C&P20 M2
With CPP (CPP M)
With CPP (CPP M) /TH
With CPP (CPP M) or TwinHead and JTF-ML at location 1
38 feeder modules, each with 8mm X
40 feeder modules, each with 8 mm X
40 feeder modules, each with 8 mm X
28 feeder modules, each with 8 mm X
Technical data
Tape reel diameter to 330.2 mm (13")
Component trolley changeover time < 1 minute
Temperature range Between -25°C and 55°C
Atmospheric humidity Up to 95%
Ambient pressure Up to 1700 m height without pressure equalization
Room temperature
SIPLACE TX1/TX2/TX2i/TX2i W
SIPLACE TX2i/TX2 micron
Between 15°C and 35°C
+ 18°C to + 25°C (
± 2K)
Atmospheric humidity 30% to 75%
(on average not higher than 45%, so that there is no risk of
condensation on the placement machine.)
Ambient pressure > 750 mbar (corresponds to 2500 m above mean sea level)
3 Technical data and assemblies User manual SIPLACE TX-Series
3.2 Ambient conditions and connection values From software version 713.0 Edition 01/2020
112
3.2.3 Compressed air supply and compressed air specification
3
Compressed air supply
Compressed air pressure val-
ues
p
min
p
max
0.5 MPa = 5.0 bar
1.0 MPa = 10 bar
Operating pressure 0.48 MPa ± 0.025 MPa (4.8 bar ± 0.25 bar)
Compressed air connection 1/2" hose connection
Compressed air consumption
*a
Placement head configuration Compressed air con-
sumptionwith vac-
uum pump
Compressed air con-
sumption without vac-
uum pump
*b
SIPLACE TX2i/TX2 C&P20 P / C&P20 P
CPP / CPP
CPP / TH
120 Nl/min
--
--
--
260 Nl/min
220 Nl/min
SIPLACE TX2i/TX2 micron C&P20 M2/C&P20 M2
CPP M/CPP M
120 Nl/min
--
500 Nl/min
360 Nl/min
SIPLACE TX2i W C&P20 P / C&P20 P
CPP / CPP
120 Nl/min
--
--
260 Nl/min
SIPLACE TX1 C&P20 P
CPP
TH
70 Nl/min
--
--
--
130 Nl/min
130 Nl/min
Compressed air specification
Particle size (ISO class 3) 0.1 µm
Particle density (ISO class 3) 0.1 mg/m³
Maximum oil content
(ISO class 1)
Particle density 0.01 mg/m³
Pressure dewpoint (ISO class 4) Dewpoint + 3°
*)a Average consumption values.Under normal atmospheric conditions at 20°C and 1013 hPa.
*)b Optional