00197975-06_UM_TX-Serie_EN.pdf - 第80页
2 Operational safety User manual SIPLACE TX-Series 2.5 Safety features From software version 713.0 Edition 01/2020 80 2.5 Safety features 2.5.1 Protective covers The travel range of the g antries is covered with two mova…
User manual SIPLACE TX-Series 2 Operational safety
From software version 713.0 Edition 01/2020 2.4 Safety instructions for operation
79
2.4.11 Safety instructions for emptying the waste tape container
The waste tape container must be pulled out of the component trolley for emptying. There is a risk
of catching your thumbs as you do so. To prevent this, observe the safety instructions in section
5.8.2
, page 252.
2 Operational safety User manual SIPLACE TX-Series
2.5 Safety features From software version 713.0 Edition 01/2020
80
2.5 Safety features
2.5.1 Protective covers
The travel range of the gantries is covered with two movable protective covers. The protective
hoods and covers serve as protective devices which prevent unauthorized access to the inside of
the placement machine.
2
2
Fig. 2.5 - 1 Protective covers
(1) Protective cover location 1
(2) Protective cover location 2
(T) Direction of travel
CAUTION
Risk of damage!
The protective covers and other covers could be damaged if too much force is exerted.
Do not stand on or climb up the protective covers and other covers.
(1)
(2)
User manual SIPLACE TX-Series 2 Operational safety
From software version 713.0 Edition 01/2020 2.5 Safety features
81
Function 2
If the protective cover is swung upwards (45° or 60° position), the power supply to the gantry axes
will be immediately interrupted. The gantry axes stop moving. The message "Close cover" is dis-
played on the screen.
Close the protective covers and press the START button (item 2 in fig. 2.5 - 2), to continue
placement.