00197975-06_UM_TX-Serie_EN.pdf - 第36页
1 Introduction User manual SIPLACE TX-Series 1.7 Operator levels From software version 713.0 Edition 01/2020 36
User manual SIPLACE TX-Series 1 Introduction
From software version 713.0 Edition 01/2020 1.7 Operator levels
35
1.7 Operator levels
Certain functions or menus may only be executed or accessed by specially trained personnel. A
differentiation is made between the following operator levels:
– Production
– Advanced production
– Service (customer)
The operator levels "Advanced production" and "Service (customer)" can be password protected.
The operator level "Service (SIPLACE)" is already password protected.
Production 1
– This operator level includes those people who have been trained to operate the placement
machine
– . These people are authorized to use any functions associated with operating the placement
machine and may access any menus needed to use the placement machine.
Advanced production 1
People with this operator level have completed special training and are authorized to perform
setup tasks e.g. creating setup configurations or determining Vision parameters etc.
Service (customer) 1
People with this operator level are specially trained technicians at the customer end, who can, for
example, define machine option settings.
1
1 Introduction User manual SIPLACE TX-Series
1.7 Operator levels From software version 713.0 Edition 01/2020
36
User manual SIPLACE TX-Series 2 Operational safety
From software version 713.0 Edition 01/2020 2.1 Safety instructions
37
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This user manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
2
2
2
2
DANGER
Definition
Danger, as used in this instruction manual, means that death, severe injury or consider-
able damage to equipment will occur if the danger instructions are not followed.
WARNING
Definition
Warning, as used in this user manual, means that death, severe injury or considerable
damage to equipment may occur if the warning instructions are not followed.
CAUTION
Definition
Caution, as used in this user manual, means that slight injury or damage to equipment
may occur if the caution instructions are not followed.
PLEASE NOTE
Definition
A note, as used in this user manual, provides information on the product or indicates a
part of the user manual that requires particular attention.