00196626-06_AI_Portalmodularitaet_SX12_de_en.pdf - 第104页

Fitting the Gantry Final Wo rk Performing Calibration 104 Gantry Modularity Portalmodularität 3.6.6 Performing Calibration Overview The SW704 divides the mapping data and then merges them during the gantry up grade. In m…

100%1 / 120
Fitting the Gantry
Fitting the Nozzle Changer and Options Final Work
Gantry Modularity Portalmodularität 103
Hotlink card [03052135-xx]
Hotlink card [03052135-xx]
3.6.5 Fitting the Nozzle Changer and Options
Installing the required nozzle changer (head-related)
► See also the "Nozzle Changer Assembly Guide for SIPLACE SX series German/English"
[00196578-xx].
Fitting the stationary cameras (optional)
► See also the "Stationary Camera Type 33 Assembly Guide German/English" [00196608-xx] and the
"Stationary Camera Type 25 Assembly Guide German/English" [0094554-xx].
Fitting the component reject bin query (optional)
► See also the "Reject Bin Query Assembly Guide for SIPLACE SX1/SX2 German/English"
[00196615-xx].
Taking into account the component trolley docking unit inner/outer
► See also the "SIPLACE SX1/SX2 Service Manual" [German: 00196496-xx] [English: 00196497-xx]
Connection on the hotlink card Designation
CAM0 Head cameras gantry 1
CAM2 Stationary cameras gantry 1
CAM1 Head cameras gantry 2
CAM3 Stationary cameras gantry 2
Fitting the Gantry
Final Work Performing Calibration
104 Gantry Modularity Portalmodularität
3.6.6 Performing Calibration
Overview
The SW704 divides the mapping data and then merges them during the gantry upgrade. In most cases
this means that only a brief calibration procedure needs to be performed (see Fast Hardware Exchange
and flow diagram).
If gantry 1 is fitted, you need to perform PCB/component mapping with the glass plate, irrespective of
the head configuration (gantry 1 is the master gantry).
NOTICE
TH gantry at location 2
If there is a TH gantry at location 2 (gantry 2), the PCB mapping data must be present. Com-
ponent mapping can then be performed using the aluminum plate.
NOTICE
Long Board Option
If a gantry is installed on a machine with Long Board Option (LBO), this gantry has to be
mapped with the mapping with LBO button.
Fitting the Gantry
Performing Calibration Final Work
Gantry Modularity Portalmodularität 105
Calibration
► SR 704.xx
► User => Service
► Machine Service => Machine Configuration
► Confirm and Change Configuration => confirm