00196626-06_AI_Portalmodularitaet_SX12_de_en.pdf - 第115页
Dismantling a Gantry Performing Calibration Gantry Modularity Portalmodular ität 115 4.2 Performing Calibration
Dismantling a Gantry
Final work on the machine
114 Gantry Modularity Portalmodularität
4.1 Final work on the machine
► At location 2 only: fit the long end position buffer if the gantry has been removed. Use a torque
wrench to tighten to 14 Nm. Take a look at the buffer monitoring function! The safety switch for for
the buffer monitoring function must engage in the Schmersal switch.
► Fit the keyboard and close the two side doors again.
► Calibrate (see below).
► Fit the trailing cable to the holder next to the GCU.
CAUTION
Check, stationary camera, nozzle changer
► Check whether gantry 1 can move to location 2 unhindered and whether it can also reach
the table pickup position.
► In certain configurations, you need to dismantle the stationary camera and the second noz-
zle changer row and then move the table from the outer to the inner position.
Dismantling a Gantry
Performing Calibration
Gantry Modularity Portalmodularität 115
4.2 Performing Calibration
Dismantling a Gantry
Performing Calibration Description and Connections on the GCU
116 Gantry Modularity Portalmodularität
4.2.1 Description and Connections on the GCU
GCU - front side
GCU - rear side