00196626-06_AI_Portalmodularitaet_SX12_de_en.pdf - 第109页
Fitting the Gantry Modifications in SIPLACE Pro Final Work Gantry Modularity Portalmodular ität 109 Setups The ne w gant ry conf iguration of the station configuration is us ed aut omatically w hen new setups are cr e - …
Fitting the Gantry
Final Work Modifications in SIPLACE Pro
108 Gantry Modularity Portalmodularität
3.6.7 Modifications in SIPLACE Pro
Station
The SX machine type has to be configured in the Station Editor. At the standard station configuration
either Single gantry (SX1) or Double gantry (SX2) can be selected.
The new machine configurations are automatically used for new setups.
After a hardware change adequate modifications have to be made in SIPLACE Pro.
Station configuration setting Single gantry (SX1) or Double gantry (SX2)
Fitting the Gantry
Modifications in SIPLACE Pro Final Work
Gantry Modularity Portalmodularität 109
Setups
The new gantry configuration of the station configuration is used automatically when new setups are cre-
ated
If the existing Setups should be used in the future then each setup must be changed to match the gantry
configuration.
Modification of gantry configuration in the respective setup.
Location 2 can be configured afterwards.
The respective head, cameras, nozzles and tables at location 2 has to be edited.
Fitting the Gantry
Final Work Modifications in SIPLACE Pro
110 Gantry Modularity Portalmodularität
Configuration of head, cameras, nozzles and tables
Recipes / Jobs
If existing recipes and jobs should be used in the future then all of them have to be re-optimized with the
new gantry configuration.