00198375-02_UM_OnBoardPCB-Inspection-R18-1_DE_EN.pdf - 第38页
38 User Manual / Bedienungsanleitung Onboard PCB Inspection 06/2018 Contents 5.3.4 Error During Solder Paste Inspection .. 66 5.3.5 Incomplete Description of SIPLACE Pro Inspection Area .. 67 5.3.6 Inspection Results…
37User Manual / Bedienungsanleitung Onboard PCB Inspection 06/2018
Contents
Contents
1 Introduction.. 39
1.1 General.. 40
1.1.1 Symbols / Notes.. 40
1.1.2 ASM on the World Wide Web.. 40
1.1.3 Release History.. 40
2 What is Onboard PCB Inspection?.. 41
2.1 Customer Benefits.. 41
2.2 System Requirements.. 41
2.3 The Inspection Methods.. 42
2.3.1 Solder Paste Inspection (SPI).. 42
2.3.2 Before Placement Inspection (BPI).. 42
2.3.3 After Placement Inspection (API).. 42
2.4 Prerequisites and Restrictions.. 42
2.4.1 General Notes.. 42
2.4.2 Regarding Solder Paste Inspection (SPI).. 43
2.4.3 Regarding Before Placement Inspection (BPI).. 43
2.4.4 Regarding After Placement Inspection (API).. 44
3 Programming and Download.. 45
3.1 Assigning Inspection Options to the Placement Position.. 45
3.2 Download to the Station.. 45
3.3 Precedence Rules in After Placement Inspection.. 46
4 Teaching Inspection Areas at the Station.. 49
4.1 Teaching Required.. 49
4.2 Teaching Solder Paste Inspection (SPI).. 50
4.2.1 Setting the Illumination... 50
4.2.2 Inspecting the Solder Deposit Teaching Area.. 52
4.2.3 Evaluating the Teaching Result.. 53
4.2.3.1 Evaluating the solder deposit.. 53
4.2.3.2 Average Heights of Solder Deposits.. 54
4.3 Teaching with Before Placement Inspection (BPI).. 55
4.3.1 Setting the Illumination... 56
4.3.2 Setting the Teaching Area.. 56
4.3.3 Defining Exclusion Areas.. 58
4.3.4 Applying the Successful Teaching Run.. 59
4.3.4.1 Checking Obscured Areas.. 60
4.4 Teaching with After Placement Inspection.. 60
5 Inspection Process at the Station.. 61
5.1 Successful Inspection Results.. 61
5.2 Comparing Solder Height Differences From Model.. 62
5.3 Handling of Bad Inspection Results.. 62
5.3.1 Compare solder deposits.. 62
5.3.2 Lost Components Recognized.. 63
5.3.3 Offset Recognized.. 65
1 Introduction
User Manual / Bedienungsanleitung Onboard PCB Inspection 06/2018 39
1 Introduction
This manual describes the concept and use of OnBoard PCB Inspection. It is designed to familiar-
ize you with the OnBoard PCB Inspection tool and guide you through the individual processes.
NOTICE
Station software online help and SIPLACE Vision.
Details about the individual views, their respective functions and parameters can be found
in the station software online help for SIPLACE Vision.
The contents of this manual address the following user groups:
●
Operator
The operator has completed appropriate training and is authorized to carry out tasks on the
machine and line, such as the configuration and refilling of components, setup verification and
production preparation in the pre-setup area.
●
The line engineer
The line engineer has completed special training and is authorized to carry out tasks, such as
the creation of setup configurations and definition of inspection parameters etc.
●
The service engineer
Persons of this class have been trained to carry out servicing work, to set up machines and to
change the setup of machines.
CAUTION
Trained and qualified personnel
Only people with the appropriate training for the specific software part may carry out tasks
on the machine. All tasks must be carried out by trained and qualified personnel. All warn-
ing, caution and danger notes MUST be observed!
CAUTION
Contents of this software guide
We would like to draw your attention to the fact that the contents of this software guide are
not part of a previous or existing agreement, commitment or legal contract, neither is this in-
tended to modify one of the above. All obligations of ASM Assembly Systems GmbH & Co.
KG may be taken from the appropriate sales contract, which also contains a complete and
valid warranty agreement. These contractual statements are neither extended nor restricted
by this software guide.