00197043-04_VD_706_1_SP2_705_05_SP2_DE_EN.pdf - 第19页

Station S oftware 70 6. 1 SP 2 /705.05 SP 2 / Vers ion De scription Ausgabe 07/2013 E dition 19 Item 1: Nozzle Changer State This s tate is displa yed in th e Nozzle c hanger view o n the GUI. T he state c an be m odifie…

Station Software 706.1 SP2/705.05 SP2 / Version Description Ausgabe 07/2013 Edition

WARNING

Changing Filling Level Manually after Exchanging Waffle-Pack Tray and Pick-up

Errors!

With the buttons on the feeder a new waffle-pack tray can be made available. However,

the filling level is not automatically modified at the station.

If the operator does not change the fillling level manually, the pick-up sequence will be

continued at the filling level of the last waffle-pack tray and some components will get

lost.

If the filling level is not manually modified after a waffle-pack tray has been exchanged

and the components will be put back in the tray according to the configuration, it may

happen that they are put pack at occupied positions. Thus, strange noises arise and

damages might result.

Further restrictions for the TrayStak Feeder AX are described in chapter 9.

6.5 FCU State Display on the GUI

Compatible mode: Complete

In combination with a manual table, the LED state display and the DIP switch on the FCU (Feeder

Control Unit) are invisible or inaccessible on the SX1/SX2, DX1/DX2, SX4 and DX4 placement

machines.

For check and test purposes it is therefore possible to display the following states for the locations

1-4 on the GUI for these placement machines.

1. Lock state of the single nozzle changers (open / closed).

2. Magazine checking state for the single nozzle changer magazine location of the different

nozzle changers (magazine present / not present).

3. States of the reject bin query sensors (bin available / not available). The states of the sensors

that are not requested in the current bin configuration are explicitliy shown (head / gantry

modularity).

4. Air blast valve output of the nozzle station (air blast enabled / disabled).

5. Current preset state of the FCU DIP switch (enabled / disabled).

Station Software 706.1 SP2/705.05 SP2 / Version Description Ausgabe 07/2013 Edition

Item 1: Nozzle Changer State

This state is displayed in the Nozzle changer view on the GUI. The state can be modified (Open /

Close).

Figure 5-3: Lock state of nozzle changer

Item 2: Magazine State

This state is displayed in the Safety circuit view on the GUI.

Figure 5-4: Magazine state

Station Software 706.1 SP2/705.05 SP2 / Version Description Ausgabe 07/2013 Edition

Items 3 to 5: LED for Air Blast Valve, DIP Switch and Reject Bin

These states are displayed in the new FCU Inputs/Outputs view under Manual operations –

Subsystems on the GUI and are accessible as of the Machine Service activity level.

Figure 5-5: States of air blast valve, DIP switch and reject bin

There are no sensors to check the state of the air blast valves. Only the ports to which the air blast

valves are connected can be tested - no matter what is actually connected and operable there.

With the Air blast valve button it is possible to enable the display of changes on these ports. The

displayed state can be modified on the GUI.

The test mode to check the presence / absence of a reject bin can be enabled and disabled with

the DIP switch, bit 3: Reject bin test mode button.

Only bit 3 (=reject bin test mode) can be enabled and disabled for the DIP switch.

6.6 DX4 Placement Machine - PCB Barcode Reader Functions

Compatible mode: Complete, if the barcode reader is upgraded

All PCB barcode reader functions that can be used on the SX4 placement machine can be

unrestrictedly used on the DX4 placement machine as of this station software version.