00197043-04_VD_706_1_SP2_705_05_SP2_DE_EN.pdf - 第44页

Station S oftware 70 6. 1 SP 2 /705.05 SP 2 / Vers ion De scription Ausgabe 07/2013 E dition 44 7 Hardw are S pecif ication s 7.1 Supporte d F eeder T yp e s The f ollowing feeder s are suppor ted b y the 70 6.1 SP 2 sta…

100%1 / 144
Station Software 706.1 SP2/705.05 SP2 / Version Description Ausgabe 07/2013 Edition
43
6.23 Additional Error Detection Options
Two new error detection options can be set in the Machine options.
Figure 5-23: Additional options in machine options
Remeasure fiducials after placement
This option makes sure that the board has not been moved during placement. If a configurable
threshold is exceeded, the machine stops and the operator is prompted to inspect the placement
positions of the boards.
Check plausibility of fiducial distances
With this option it can be decided if the fiducial distances on a panel shall be plausible to each
other. If the distance of the measured fiducials differs more than a configurable tolerance from the
target distance it is assumed that a faulty structure has been found. The user will be guided to the
teaching menu.
6.24 C&P12 Placement Head on SX1/SX2 V2
The C&P12 placement head is supported on the SX1/SX2 V2 placement machines. The same
prerequisites and restrictions apply as for the DX1/DX2 placement machines.
Station Software 706.1 SP2/705.05 SP2 / Version Description Ausgabe 07/2013 Edition
44
7 Hardware Specifications
7.1 Supported Feeder Types
The following feeders are supported by the 706.1 SP2 station software version:
– 8 mm – 88 mm X-feeder
– 2x8 mm X-feeder
– 4 mm X-feeder
– 16 mm XN-feeder
– 104 mm X-feeder
– 12 V2 X-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– Glue Feeder
– TrayStak Feeder AX (X4i S on location 2 and 3 only)
– Arbitrary Carrier X (only X-series)
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– FFI feeders:
HanSan LED feeder
Top Engineering LED feeder
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE multi stick 60 AX
IPTE multi stick XL80 AX
– Stick feeder with X-adapter
– Label feeder with X-adapter
– Reject conveyor with X-adapter
– Dip module for X-tables (LDU_X)
– MTC2 (X2, X3, X4 on location 2 and 4, X3 S on location 2, X4 S)
– WPC5 (only SX1/SX2)
– WPC6 Non Stop Module (SX1/SX2 only)
– Splice sensor X-feeder
Station Software 706.1 SP2/705.05 SP2 / Version Description Ausgabe 07/2013 Edition
45
7.2 Digital Camera Systems
Digital CCD cameras are used as the camera systems.
7.2.1 Component Cameras
All heads are equipped with the standard camera listed below. High-resolution cameras are
additionally available for Twin Head and CPP.
Component camera Camera
type
CPP
type
C&P20A
head
Twin
Head
VHF P&P
head
C&P12
head
C&P
6 x 6 mm digital
23
-
(default) -
-
C&P
6 x 6 mm digital
41
-
(optional) -
-
C&P
18.7 x 18.7 mm digital
28
(optional) - -
(default)
C&P
27 x 27 mm digital
29
(optional) - -
-
C&P
27 x 27 mm digital
30
(default) - -
(optional)
C&P
16 x 16 mm digital
38
(optional) - -
-
Stat. P&P
16 x 16 mm digital
2
)
25
- -
(optional)
(optional) -
Stat. P&P
55 x 45 mm digital
2)
33
(optional)
1)
-
(default)
(optional) -
Stat. P&P
32 x 32 mm digital
36
(optional) -
(optional) -
Table 7-1: Component cameras
1)
Only together with CPP head, with which components up to a height of 11.5 mm can be placed.
2)
Is not supported on the SIPLACE X4i placement machine.
7.2.2 Board Cameras
Board camera Camera type SIPLACE X-series SIPLACE SX-
series
SIPLACE DX-
series
28 digital 34 (default) (default) (default)
28 digital 34 H (default)
1)
Multicolor 28 digital 24 (optional)
Table 7-2: Board cameras
1)
Only supported on the SX1/SX2 V2 placement machine.