User-Manual-NeoDen9-PNP-machine.pdf - 第48页
48 Zhejiang Neoden T echnol ogy Co., Ltd operate. Otherw ise will cau se feede r floating in the o peration and collision problem. In case of this situ ation, plea se conta ct the after-sales department of our co mpany W…
47
Zhejiang Neoden Technology Co., Ltd
Fig 4
For 12mm,16mm width feeder, the feed rate can be adjusted by adjusting the parameters of the feed regulator.
11.3 Incorrect installation Samples：
1. Incorrect setting of reel in reel storage (see figure.5)
Fig5
2. The film is twisted, not tight enough, or the film is not between the white guide wheel and the black gear
3. Cautions: Strictly refer to the instruction manual to use the feeder, and non-standard operation is strictly forbidden
Warning: when installing the feeder, if feel the hand press is not strong, or loose match in place, then it is forbidden to
48
Zhejiang Neoden Technology Co., Ltd
operate. Otherwise will cause feeder floating in the operation and collision problem. In case of this situation, please contact
the after-sales department of our company
Warning: when installing the feeder on the equipment, make sure there is no foreign matter on
the feeder fixed plate, and make the bottom surface of the feeder fully fit with the fixed plate. The handle is the main way
to lock the feeder, so pls pay attention to protect this part. (Note:Don’t move the feeder while the equipment is running,
or it may cause collision problem.)
11.3.1 Nozzle
The size of the nozzle
Please choose nozzles according to the shape and size of components.
Table1-1 Nozzle
Type
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Model
CN030
CN040
CN065
CN100
CN140
CN220
CN400
CN750
Illustration
External
Diameter
0.6mm
0.8mm
1.0mm
1.8MM
2.0mm
3.6mm
5.0mm
9.0mm
Inner
Diameter
0.3mm
0.4mm
0.7mm
1.0MM
1.4mm
2.2mm
4mm
7.5mm
49
Zhejiang Neoden Technology Co., Ltd
Type Special Special Special Special Special Special Special custom
Model
YX01 YX02 YX03 YX04 YX05 YX06 -
Illustration
Shape
The reference of nozzles selection
In order to ensure the placement accuracy，please select nozzles according to the shape and size of components
Table 1-2 size comparison of Nozzles
12.Maintenance
12.1 Take effective measures to reduce /avoid malfunction
12.1.1 Reinforce daily maintenance
P&P machine is that high-accuracy device which requires a clean working environment with constant temperature and
humidity, so it’s necessary to have a routine maintenance.
Model Recommendation（Imperial system）
CN030 0201
CN040 0402（optimal）
CN065 0402、0603 etc.
CN100 0805、diode、1206、1210 etc.
CN140 1206、1210、1812、2010、SOT23、5050, etc.
CN220 SOP series ICs、SOT89、SOT223、SOT252, etc.
CN400 ICs from 5 to 12mm
CN750 ICs bigger than 12mm
YX01 3528serices Soft bead
YX02 High power lamp beads
YX03 Chips and BGA from 11mm to 17mm BGA
YX04 Chips and BGA bigger than 17mm
YX05 4148 circular diode
YX06 3535 ball shape LED(Spherical height 1.4mm,overall height 1.9mm）