DR4900 用户手册_Full version.pdf - 第18页
Option Description Date & time Date & time —Sets the Date format , Date and Time format . Defaults: dd-mm-yyyy, date set at factory and 24 hours. The Automatic time setting is only enabled when the instrument is …

3. Push Add to add a new operator ID.
4. Select an option.
Option Description
Color Selects a color to easily distinguish between the different operators.
Name Enters a unique name or ID.
Password Sets a password for the new operator.
Confirm password Accepts the set password for the operator.
Security level Selects the security level: Basic, Intermediate or Advanced. The change must be done
with the administrator password.
5. Push Save.
7.2.2.1 Use the operator ID to log in
Log in to the instrument to add the operator ID to the measurements.
1. Push in the menu bar.
2. Select the applicable Operator ID.
3. Enter the password.
4. Push Log in.
7.2.3 Configure security management
Do the instructions that follow to configure different access permissions.
1. Push , then select Settings > Security.
2. Push Security setup.
3. Set Security to on.
4. Set a password for administrator rights.
Note: The password must contain a minimum of 10 characters with a combination of numbers, symbols,
uppercase and lowercase letters.
5. Enter the password again.
A pass phrase shows. Record the pass phrase to change the password if the password is
forgotten.
6. Push Save.
A default security list for Basic, Intermediate, Advanced and Admin rights shows.
7. Enter the admin password again, then select an option.
Option Description
Security setup Changes the administrator password.
Restore defaults Sets all of the security rights to the factory defaults.
Edit operator rights Edits the operator rights. Select or unselect different functions.
8. Push Done.
9. Push to go back to the home screen.
7.2.4 Configure the general settings
1. Push , then select Settings > General.
2. Select an option.
Option Description
Language Language —Selects the applicable language from the list. Default: English
English 17

Option Description
Date & time Date & time —Sets the Date format, Date and Time format. Defaults: dd-mm-yyyy, date
set at factory and 24 hours. The Automatic time setting is only enabled when the
instrument is connected to Ethernet or Wi-Fi. Default: Off. Then, the Time zone and the
Time are automatically set. Default: Berlin, time set at factory
Display &
power
Display & power —Sets the Display brightness and the Standby timer.
Display brightness —Moves the slider to adjust the brightness of the display. Default: 90
Standby timer —Selects the time after which the instrument is set to standby: 30 minutes,
1 hour (default), 2 hours or 12 hours. When the device is in standby mode, touch the display
to wake up the instrument. Default: On
Sound Sound —Enables or disables the sound for All sounds. Default: On
Moves the slider to enable, disable or adjust the sound volume for the Touch screen
(default: 50%), Reading done (default: 50%), Timer (default: 50%), Startup (default: 30%),
Warning (default: 20%), Camera detection done (default: 20%) and Standby (default:
30%).
3. Push Save.
7.2.4.1 Set the instrument to standby mode
The standby mode decreases power consumption and keeps important functions and the latest
condition in memory so that the instrument can quickly start to operate again.
1. Push , then select Settings > General > Display & power.
2. Set the Standby timer to on.
3. Select the applicable standby time.
4. Push Save.
7.2.5 Configure external devices
1. Push , then select Settings > Connectivity.
2. Select an option.
Option Description
Ethernet Ethernet —Configures the Ethernet parameters to connect to a network or send data to
a PC. Connect an Ethernet cable to configure the network.
Wi-Fi Wi-Fi —Selects a Wi-Fi network for data transmission. Connect a Wi-Fi dongle to
configure the Wi-Fi network.
Network shared
folder
Network shared folder —Selects the destination folder for data transmission. Default:
Off
Printer Printer —Configures the network or USB printer settings for data transmission. Default:
Off
3. Push OK.
7.2.6 Service menu
1. Push , then select Settings > Service.
2. Select an option.
Option Description
Update Update —Updates the software of the instrument to the latest version. Refer to Update
the instrument software on page 19.
Service logs Service logs —Downloads the service logs for technical support.
18 English

Option Description
Backup & restore Backup & restore —Sends all of the data (e.g., sample-IDs, operatior-IDs and
settings) to a connected instrument.
Next service Next service —Shows the service due date.
Hach service menu Hach service menu —Shows the factory service menu. A password is necessary.
3. Push OK.
7.2.6.1 Update the instrument software
Install software updates regularly for best results.
1. Download the software from the manufacturer website to a USB flash drive.
2. Install the USB-flash drive in one of the USB ports of the instrument. Refer to Figure 1 on page 7.
3. Push , then select Settings > Service > Update.
A pop-up window shows the current and new software version.
4. Push OK to start the update process.
Wait until the software update is complete.
5. When the software was successfully updated, push OK.
The instrument will start again.
6. Remove the USB flash drive from the USB port.
7.2.7 Use a sample ID
Sample IDs are used to specify the sample location or to keep other special information about the
sample. The sample ID can have a maximum length of 26 characters.
To add a sample ID manually,
• scan the bottle label to import the sample ID information
3
or
• import a CSV table with a list of sample IDs.
1. Go to the measurement screen, select Sample ID list > .
2. Select an option.
Option Description
Customize list Adds the Sample ID name, Date of sampling, Time of sampling, Collected by, Comment
and identifies the sample ID as a favorite if necessary. Refer to Customize a sample ID
on page 19.
Import data Imports a sample ID list with a maximum of four columns in CSV format. Adds
information about the Sequence, Sample ID, Date time and Collected by. Add the file to
a folder called "SampleID". Save the folder to the root directory of the USB flash drive or
in the network shared folder if a device is connected.
Read bottle tag
(optional)
Scans the bottle tag to import the sample ID information if a camera is connected. Refer
to Use the camera (optional) on page 28.
7.2.7.1 Customize a sample ID
1. Go to the measurement screen, select Sample ID list > > Customize list.
2. Push Add to make a new sample ID.
3. Select a color identifier, if necessary.
4. Enter the sample ID name, the date and time, and the name of the operator.
5. Push to add a comment to the sample ID.
3
Only available for instruments with a connected camera
English 19