DR4900 用户手册_Full version.pdf - 第4页
Section 2 Specifications Specifications are subject to change without notice. Specification Details Dimensions (W x H x D) 255 x 226 x 344 mm (10.03 x 8.9 x 13.5 inch) Enclosure rating IP20 (not included: interfaces and …

Table of Contents
1 Product components on page 3
2 Specifications on page 4
3 General information on page 5
4 Installation on page 8
5 Startup assistant on page 12
6 User interface and navigation on page 12
7 Operation on page 15
8 Maintenance on page 29
9 Troubleshooting on page 31
10 Replacement parts and accessories on page 32
Section 1 Product components
Make sure that all components have been received. If any items are missing or damaged, contact the
manufacturer or a sales representative immediately.
1 DR4900 spectrophotometer 5 Cell adapter A: 10-mm
rectangular cells/1-inch round
cell
9 Camera (optional)
1
2 Power supply 6 Cell adapter B: 30-mm vials
(China only)
10 Sample cells, matched pair (US
only)
3 Power cord with country-specific
adapter plugs
7 Dust cover
4 Light shield 8 Camera holder (optional)
1
1
The camera and camera holder can look different from the images shown.
English 3

Section 2 Specifications
Specifications are subject to change without notice.
Specification Details
Dimensions (W x H x D) 255 x 226 x 344 mm (10.03 x 8.9 x 13.5 inch)
Enclosure rating IP20 (not included: interfaces and power supply)
Weight 4.8 kg (10.58 lb)
Pollution degree 2
Overvoltage category II
Protection class Class I
Measurement mode Transmittance (%), absorbance (Abs) or concentration
Light source Halogen lamp
Wavelength range 320 to 1100 nm
Wavelength accuracy ±1.5 nm (340 to 900 nm)
Wavelength reproducibility ±0.1 nm
Wavelength resolution 1 nm
Wavelength calibration Automatic
Wavelength selection Automatic, based on the selected procedure or measurement mode
Scanning speed 19 nm/s (in increments of 1 nm)
Spectral bandwidth 5 nm
Photometric measuring range ±3.0 Abs (340 to 900 nm)
Photometric accuracy 5 mAbs at 0.0 to 0.5 Abs
1% at 0.50 to 2.0 Abs
Photometric linearity < 0.5% to 2 Abs
≤ 1% at > 2 Abs with neutral glass at 546 nm
Stray light < 0.1% T at 340 nm with NaNO
2
Data log 10000 measured values (measured values, date, time, sample ID, user ID)
User programs > 100 user programs
Power requirements Power adapter
Input: 100–240 VAC (264 VAC maximum; 90 VAC minimum)/50–60 Hz
Output: 15 V/40 VA
Communications Use only shielded cable with maximum length of 3 m (9.8 ft) for:
USB type A and type C (front side)
USB type A and type C (back side)
Use only shielded cable (e.g., STP, FTP, S/FTP) with maximum length of 20 m
(65.6 ft) for:
1x Ethernet
Environmental conditions Indoor use only
Operating temperature 10 to 40 °C (50 to 104 °F), maximum 80% relative humidity, non-condensing
Storage temperature –40 to 60 °C (–40 to 140 °F), maximum 80% relative humidity, non-condensing
Altitude 2000 m (6562 ft) maximum
4 English

Specification Details
Certifications CE, UKCA, CMIM, FCC, ISED, certified to UL and CSA safety standards by TÜV
Warranty 1 year (EU: 2 years)
Section 3 General information
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual unless otherwise required by
applicable law or contract between the parties. The manufacturer reserves the right to make changes
in this manual and the products it describes at any time, without notice or obligation. Revised editions
are found on the manufacturer’s website.
3.1 Safety information
The manufacturer is not responsible for any damages due to misapplication or misuse of this product
including, without limitation, direct, incidental and consequential damages, and disclaims such
damages to the full extent permitted under applicable law. The user is solely responsible to identify
critical application risks and install appropriate mechanisms to protect processes during a possible
equipment malfunction.
Please read this entire manual before unpacking, setting up or operating this equipment. Pay
attention to all danger and caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
If the equipment is used in a manner that is not specified by the manufacturer, the protection
provided by the equipment may be impaired. Do not use or install this equipment in any manner
other than that specified in this manual.
3.1.1 Use of hazard information
D A N G E R
Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or serious injury.
W A R N I N G
Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death or serious
injury.
C A U T I O N
Indicates a potentially hazardous situation that may result in minor or moderate injury.
N O T I C E
Indicates a situation which, if not avoided, may cause damage to the instrument. Information that requires special
emphasis.
3.1.2 Precautionary labels
Read all labels and tags attached to the instrument. Personal injury or damage to the instrument
could occur if not observed. A symbol on the instrument is referenced in the manual with a
precautionary statement.
This is the safety alert symbol. Obey all safety messages that follow this symbol to avoid potential
injury. If on the instrument, refer to the instruction manual for operation or safety information.
Electrical equipment marked with this symbol may not be disposed of in European domestic or public
disposal systems. Return old or end-of-life equipment to the manufacturer for disposal at no charge to
the user.
English 5