00193411-02.pdf - 第143页
User Manual SIPLAC E HS-60 6 Component han dling Software version SR.503.xx 07/2003 US Edition 6.4 Component trolley 143 6.4.5 Support for the middle t ape reel for 3 x 8 mm feeders T ype 3 x 8 mm S feeders transp ort co…
6 Component handling User Manual SIPLACE HS-60
6.4 Component trolley Software version SR.503.xx 07/2003 US Edition
142
6
Fig. 6.4 - 3 Compressed air supply for bulk case feeders
6
(1) Compressed air distributor
(2) Screw DIN 912, M8x20
(3) Screw DIN 912, M5x10
(4) Component feeder table
User Manual SIPLACE HS-60 6 Component handling
Software version SR.503.xx 07/2003 US Edition 6.4 Component trolley
143
6.4.5 Support for the middle tape reel for 3 x 8 mm feeders
Type 3 x 8 mm S feeders transport components to the pick-up position on three tracks. The tape
reels for the two outer tracks are located between the dividing plates in the tape container. The
middle tape reel is arranged over the tape reels for the two outer tracks.
For the middle tape reels you will therefore also need:
– 1 adapter plate for holding the tape reel holder (item 1) and
– 1 tape reel holder (item 2) for every two feeders
The adapter plate is fixed to the component trolley with four fillister head screws, and the tape
reel holders are inserted into the square openings in the adapter plate.
Fig. 6.4 - 4 Support for the middle tape reel for 3 x 8 mm feeders
6
(1) Adapter plate
(2) Tape reel holder
6 Component handling User Manual SIPLACE HS-60
6.5 Used tape cutter Software version SR.503.xx 07/2003 US Edition
144
6.5 Used tape cutter
6
Fig. 6.5 - 1 Position of the used tape cutter
6
(1) Used tape cutter
(2) Used tape channel