00193411-02.pdf - 第26页
2 Operational safety User Manual SIPLACE HS-60 2.1 Safety instru ctions Software version SR.503.xx 07/2003 US Edition 26 2.1.8 Import ant notes on environment a lly-friendly dispos al of materia ls and component s SIPLAC…
User Manual SIPLACE HS-60 2 Operational safety
Software version SR.503.xx 07/2003 US Edition 2.1 Safety instructions
25
2.1.6 Safety instructions for laser units
Permission to operate components that are classified as lasers is withdrawn if
– mechanical damage to the unit is observed, or
– any work is done on the mechanical or electrical parts of the unit.
Even damaged or missing screw locking paint on laser components (e.g. cover plates, fas-
teners, adjusting potentiometer) counts as work.
– Only SIEMENSDEMATIC AG service engineers, or the machine owner's service engineers
who have been trained by SIEMENSDEMATIC are allowed to replace laser components.
– Repairs to laser units are carried out at the SIEMENSDEMATIC factory exclusively.
2.1.7 Safety instructions on permanent magnets
Strong permanent magnets are used for the Y axis linear motor.
DANGER OF DEATH
POWERFUL PERMANENT MAGNETIC FIELDS INSIDE THE MACHINE 2
The life of persons with passive or active implants such as pacemakers, defibrillators, insulin
pumps etc. is put at risk inside the machine if protective covers are opened.
CAUTION POWERFUL MAGNETIC FIELDS 2
There is a risk that the powerful magnetic fields could corrupt data on data media or credit cards
and check cards.
2 Operational safety User Manual SIPLACE HS-60
2.1 Safety instructions Software version SR.503.xx 07/2003 US Edition
26
2.1.8 Important notes on environmentally-friendly disposal of materials
and components
SIPLACE systems are manufactured using only materials and parts that can be easily separated
and disposed of in an environmentally-friendly way. Hazardous materials are not necessary for
the installation, dismantling or operation of the system.
NOTE 2
The owner of the system has sole responsibility for the proper environmentally-friendly disposal
of machines, working materials, consumables and wear parts.
Æ Please observe your national statutory provisions for waste disposal and environmental pro-
tection.
User Manual SIPLACE HS-60 2 Operational safety
Software version SR.503.xx 07/2003 US Edition 2.2 Warning labels
27
2.2 Warning labels
2.2.1 Warning labels W201, W203 and W204 on the machine
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant
to water and weathering.
Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.
2
Fig. 2.2 - 1 Warning labels W201, W202, W203, W204, and W206 on the machine
Item W201, part no. 03009338-01
Item W202, part no. 03009341-01
Item W203, part no. 03009342-01
Item W204, part no. 03009343-01
Item W206, part no. 03009345-01