00193411-02.pdf - 第146页
6 Component handling User Manual SIPLACE HS-60 6.5 Used tape c utter Software version SR.503.xx 07/2003 US E dition 146 6.5.2 Guide t aking used tape to cutter 6 Fig. 6.5 - 3 Used tape guide in cutter 6 (1) Used tape cha…
User Manual SIPLACE HS-60 6 Component handling
Software version SR.503.xx 07/2003 US Edition 6.5 Used tape cutter
145
6.5.1 General
The placement system has a used tape cutter at each of the four component trolley locations. It
is used to cut off the waste tape. The cut pieces of tape drop into the waste tape container in the
component trolley.
Æ Empty the waste tape container every day.
6
Fig. 6.5 - 2 Used tape cutter
6
(1) Tape cutter, pneumatic
(2) Short stroke cylinder
(3) Slot for used tape removal
6 Component handling User Manual SIPLACE HS-60
6.5 Used tape cutter Software version SR.503.xx 07/2003 US Edition
146
6.5.2 Guide taking used tape to cutter
6
Fig. 6.5 - 3 Used tape guide in cutter
6
(1) Used tape channel
(2) Channel for used tape disposal
(3) Tape cutter
(4) Waste tape chute
User Manual SIPLACE HS-60 6 Component handling
Software version SR.503.xx 07/2003 US Edition 6.5 Used tape cutter
147
The used tape channels (see item 1 in Fig. 6.5 - 3) are located in front of the feeders. They are
seated directly above the used tape cutter (see item 3 in Fig. 6.5 - 3
).
The tape is automatically guided through the used tape guide channel into the used tape cutter
below. There, the tape is shredded by the pneumatically-actuated cutting blade. The waste tape
passes via the used tape chute (see item 4 in Fig. 6.5 - 3
) into the reject bin on the component
trolley.
6
Fig. 6.5 - 4 Pull-out waste tape container in the component trolley
6
(1) Component trolley
(2) Pull-out waste tape container