X-Series-Maintenance-Manual(1).pdf - 第33页
Minor Maintenance Performing Maintenance Tasks Maintenance T asks for Base Machine Maintenance Manual SIPLACE X Series 33 Cleaning /Replacin g the Head Exhaus t Air Fil ter/X Mo tor Cooli ng 4.2.3.2 Cleaning/Replacing th…
Minor Maintenance
Maintenance Tasks for Base Machine Performing Maintenance Tasks
32 Maintenance Manual SIPLACE X Series
Performing Maintenance Tasks
4.2.3 Performing Maintenance Tasks
Checking and Cleaning/Replacing the Compressed Air Filter (if required)
4.2.3.1 Checking and Cleaning/Replacing the Compressed Air Filter (if required)
CAUTION! Before checking or replacing the
compressed air filters, you need to shut off the supply of
air!
► Use the machine key to open the door to the
compressed air supply, detach the cable and remove
the door.
► Turn the main compressed air valve (1) clockwise. All
manometers must be set to zero.
► Loosen the screw (2) , and pull out the compressed
air supply.
► Place the collecting vessel under the compressed air
supply.
► Open the screw (1) beneath the cover cap (2) to
release the pressure.
► Pull the locking lever (1) on the cover downwards.
Press the cover (2) upwards and unscrew by turning
to the left (3).
► Unscrew the compressed air filter (4) and check for
dirt.
► Replace the filter if it is dirty.
⇨ Filter element 5 μm [03050213-xx]
HSxx / D1 / D2 / D4 / SX series / X series from
March 2008 pneumatic valve [03062274-xx]
(for [03060279-xx] pneumatic unit)
⇨ Replacement filter for 5 μm compressed air filter
for pneumatic valve [03038979-xx]
X series up to SN B089 [03004680-xx]
(for [03004151-xx] pneumatic unit)
⇨ Filter element for 5 μm filter (new) for pneumatic
valve [03039182-xx]
X series from SN B090 [03038691-xx]
(for [03038058-xx] pneumatic unit)
Minor Maintenance
Performing Maintenance Tasks Maintenance Tasks for Base Machine
Maintenance Manual SIPLACE X Series 33
Cleaning /Replacin g the Head Exhaus t Air Fil ter/X Mo tor Cooli ng
4.2.3.2 Cleaning/Replacing the Head Exhaust Air Filter/X Motor Cooling
Checking/Cleaning the Cooling Air Filter/Y Axes
4.2.3.3 Checking/Cleaning the Cooling Air Filter/Y Axes
Replacin g the Cool ing Air Filter/Y Ax es
4.2.3.4 Replacing the Cooling Air Filter/Y Axes
► Remove the filter as described in "4.2.3.3 Checking/Cleaning the Cooling Air Filter/Y Axes" [ ➙ 33]
and replace it with a new filter [00376006-xx].
► Remove the protective cover from the relevant
placement head.
► Loosen the fastening screw (1) on the filter casing.
► Check the "filter element 40 µm" [03003717-xx] (2)
for discoloration.
If you see discoloration, replace with a new one.
► Fit the filter, the casing and the protective cover for
the placement head.
► Repeat these steps for the filter elements of all
placement heads.
CAUTION! The main compressed air valve must
be closed for this work and the manometer set to zero!
► Open the wing screw on the upper side of the filter (1)
and pull it up and out.
► Check the filter for dirt and vacuum if required.
► Push the pneumatic unit carefully back into the
machine and fix into place with the screw
provided (2).
CAUTION! Make sure that you do not pinch any
cables or hoses!
► Open the main compressed air valve once more (1).
► Close the door to the compressed air supply.
Minor Maintenance
Maintenance Tasks for Base Machine Performing Maintenance Tasks
34 Maintenance Manual SIPLACE X Series
Cleaning/Re placing the Fi lter on the Axis Unit and Com puter Unit
4.2.3.5 Cleaning/Replacing the Filter on the Axis Unit and Computer Unit
Cleaning/Re placing the Fi lter on the Pr otective Covers (X4I Only)
4.2.3.6 Cleaning/Replacing the Filter on the Protective Covers (X4I Only)
Replacing the filters in the protective covers
► Remove the covers from the filters.
► Use a suitable nozzle to vacuum the filters.
► Check the filters for dirt.
► If a filter is very dirty, replace with a new one.
► Repeat these tasks for all eight fans.
► Vacuum the filters in the protective covers of the
SIPLACE X4I from above.
► Check the filters for dirt.
If the filters are very dirty, replace with new ones. (see
below)
► Open the Safety Cover.
► Loosen the screw (1) on the upper side of the fan.
► Push the fan element up, and fold it down carefully.
CAUTION! Take care not to damage the fan
connection cable!
► Replace the filter with a new metal filter [03076892-
xx].
► Fit the fan and screw tight.
► Close the protective cover.