X-Series-Maintenance-Manual(1).pdf - 第47页
Minor Maintenance Performing Maintenance Tasks Maintenance Tasks for Optical Systems Maintenance Manual SIPLACE X Series 47 Clean the PCB barcode sc anner 4.6.3.4 Clean the PCB barcode scanner NOTICE! The PCB barcode sca…
Minor Maintenance
Maintenance Tasks for Optical Systems Performing Maintenance Tasks
46 Maintenance Manual SIPLACE X Series
► Repeat these steps for all IC and FC cameras.
Cleaning the Cop lanarity M odule
4.6.3.2 Cleaning the Coplanarity Module
Clean the stationary 3D se nsor module
4.6.3.3 Clean the stationary 3D sensor module
► Clean the slanted glass (1) with a microfiber cloth.
CAUTION! Do not use any cleaning agents!
► Refit the upper section of the camera.
When inserting the upper section of the camera,
make sure that it is evenly seated on the bottom
section and that it cannot move.
CAUTION! Take care not to damage the glass
when fitting it.
NOTICE! The coplanarity module is optional.
► Clean the lenses (1) of the coplanarity module with a
microfiber cloth.
NOTICE! The 3D sensor module is optional.
► Clean the 3D sensor module lens (1) with a microfiber
cloth.
Minor Maintenance
Performing Maintenance Tasks Maintenance Tasks for Optical Systems
Maintenance Manual SIPLACE X Series 47
Clean the PCB barcode sc anner
4.6.3.4 Clean the PCB barcode scanner
NOTICE! The PCB barcode scanner is optional.
► Clean the lens (1) of the PCB barcode scanner with a
microfiber cloth.
Minor Maintenance
Maintenance Tasks for Nozzles Consumables, Spare and Wear Parts, Tools
48 Maintenance Manual SIPLACE X Series
Maintenance Tasks for Nozzles
4.7 Maintenance Tasks for Nozzles
Consumables, Spare and Wear Parts, Tools
4.7.1 Consumables, Spare and Wear Parts, Tools
▪ Distilled water
▪ Compressed air
▪ Nozzles 20xx, 28xx, 10xx or 12xx (depending on configuration)
▪ Ceramic nozzles 10xx, 12xx, 20xx or 28xx (depending on configuration)
▪ Nozzle magazine type 20xx, if required [03066107-xx] (depending on configuration)
▪ Magazine assembly C&P20, if required [03016831-xx] (depending on configuration)
▪ ESD wristband [00320279-xx]
▪ Ultrasound bath
▪ Guiding plate long for 10xx/20xx long [03066508-02] (for C&P20A and CPP) or
Guiding plate short [03029178-xx] (for DLM)
▪ Cleaning box for ceramic nozzles type 20xx/long [03076627-xx] (for CPP) or
Cleaning box for ceramic nozzles type 10xx/long [03055736-xx] (for C&P20A) or
Cleaning box for ceramic nozzles type 9xx [03003183-xx] (for DLM)
▪ Cartridge rack 10xx [03071700-xx] (for C&P20A und CPP), if required
▪ Plastic brush Dm 8 [00325866-xx]
Nozzle Magazines - Overview
4.7.2 Nozzle Magazines - Overview
NOTICE
ceramic nozzles
When using ceramic nozzles for the CPP, you require the "guiding plate 10xx/20xx long"
[03066508] with function state 02.
1. Cleaning box 9xx [03003183
-
02]
2. Guiding plate for cleaning box DLM [03029178
-
02]
3. Cleaning box 10xx [03038368
-
01]
4. Cleaning box 10xx long [03055736
-
01]
5. Guiding plate 10xx/20xx long [03066508
-
02]
6. Cleaning box 20xx long [03076627
-
01]
7. Cartridge rack 10xx [03071700-xx]