X-Series-Maintenance-Manual(1).pdf - 第93页

Major Maintenance Consumables, Spare and Wear Parts , Tools Maintenance Tasks for CPP Head Maintenance Manual SIPLACE X Series 93 Maintenance Tasks for CPP Head 5.6 Maintenance Tasks for CPP Head Consumable s, Spare and …

Major Maintenance

Maintenance Tasks for C&P20A Head Final Work

92 Maintenance Manual SIPLACE X Series

Final Work

5.5.6 Final Work

Attaching the maintenance label

Fitting the placement head

► Fit the placement head back onto the gantry. Read the service manual for the respective machine

first.

► Remove the protective hose for the component sensor.

► Switch the placement machine on at the main switch.

► Calibrate the placement head, preferably using the FHE function. Read the service manual for the

respective machine first.

► For SW704 and higher only: Reset the maintenance cycle counter for the corresponding assemblies.

► Remove any label which may still be present from the

placement head.

► Remove any adhesive residues and clean the area.

► Attach the label and enter the date and, if required,

the meter count, depending on how you determine

your maintenance intervals.

Major Maintenance

Consumables, Spare and Wear Parts, Tools Maintenance Tasks for CPP Head

Maintenance Manual SIPLACE X Series 93

Maintenance Tasks for CPP Head

5.6 Maintenance Tasks for CPP Head

Consumables, Spare and Wear Parts, Tools

5.6.1 Consumables, Spare and Wear Parts, Tools

▪ Starter kit for maintenance CPx and TwinHead [03071171-03]

▪ Universal placement head mounting rack [03056231-xx]

▪ Set of Allen wrenches

▪ Set of open-jawed spanners

▪ Cotton wool buds [00352931-xx]

▪ Second multipette, if required [00386154-xx]

▪ Vacuum hose DP/CPP, if required [03015920Sxx]

▪ Silencer for CPP, if required [03061440-xx]

▪ Component sensor protective cap [03080984-xx]

▪ Service manual for your maschine:

SX1/SX2/DX1/DX2: [00196496-xx] (German), [00196497-xx] (English) or

SX4/DX4: [00196712-xx] (German), [00196713-xx] (English) or

X-Serie: [00194439-xx] (German), [00194440-xx] (English)

You will find all key tools and consumable materials for maintenance work on the TwinHead, CPP and

C&P20(A) heads in the "Starter kit for maintenance CPx and TwinHead" [03071171-03].

Preparatory Steps

5.6.2 Preparatory Steps

Assembling the head mount

► Assemble the head mount. Read the head mount manual (German and English: [00196371-xx]).

► Connect the assembly mount ESD connection to an ESD connection at the workplace.

Vacuum test

► Set the nozzles for the current nozzle configuration down in the nozzle changer.

► Before you begin maintenance work, perform a vacuum test. Use the calibration nozzles 2057 for

this. If vacuum value irregularities occur at certain segments, take a closer look at these during

maintenance work. Note down the numbers of the problematic segments for later reference.

CAUTION

ESD regulations!

► Always observe the ESD regulations described in the user manual.

Major Maintenance

Maintenance Tasks for CPP Head Preparatory Steps

94 Maintenance Manual SIPLACE X Series

Removing the placement head

► Dismantle the placement head and remove it from the placement machine. Read the service manual

for the respective machine first.

► Fit the placement head onto the head mount.

Dismantling the front plate

► Dismantle the front plate of the CPP head. Read the service manual for the respective machine first.

Multipette

► Prepare the multipette. (See below)

Color-coding of dosage devices and lubricants