X-Series-Maintenance-Manual(1).pdf - 第44页

Minor Maintenance Maintenance Work on the Gantry Performing Maintenance Tasks 44 Maintenance Manual SIPLACE X Series Cleaning the Y Ax is Scale 4.5.3.2 Cleaning the Y Axis Scale Checkin g and Cl eaning th e Magnet ic Sur…

100%1 / 118
Minor Maintenance
Consumables, Spare and Wear Parts, Tools Maintenance Work on the Gantry
Maintenance Manual SIPLACE X Series 43
Maintenanc e Work on the Gantry
4.5 Maintenance Work on the Gantry
Consumables, Spare and Wear Parts, Tools
4.5.1 Consumables, Spare and Wear Parts, Tools
▪ Lint-free cloths [03082092-xx]
▪ Ethanol
▪ Protective latex gloves [00372972-xx]
▪ ESD wristband [00320279-xx]
▪ SIPLACE cleansing tissue [00315253-xx]
Preparatory Steps
4.5.2 Preparatory Steps
► There must be no PCBs in the machine during the following maintenance steps.
► Switch off the machine, disconnect it from the power supply and secure it to prevent unauthorized
reactivation. Observe the instructions in section "1.2 Preparatory Work..." [ ➙ 11].
Performing Maintenance Tasks
4.5.3 Performing Maintenance Tasks
See also
1.1.2 Safety Instructions for Working with Strong Magnetic Fields [ ➙ 8]
Cleaning the X Ax is Scale
4.5.3.1 Cleaning the X Axis Scale
CAUTION! Always use soft cloths and minimal
pressure to clean the scales.
Dirty scales can lead to counting errors and, as a
consequence, to machine stoppages.
► Clean the incremental scales (1) of the X axes with a
lint-free cloth soaked in ethanol.
Minor Maintenance
Maintenance Work on the Gantry Performing Maintenance Tasks
44 Maintenance Manual SIPLACE X Series
Cleaning the Y Ax is Scale
4.5.3.2 Cleaning the Y Axis Scale
Checkin g and Cl eaning th e Magnet ic Surfaces of th e X and Y Axes
4.5.3.3 Checking and Cleaning the Magnetic Surfaces of the X and Y Axes
CAUTION! Always use soft cloths and minimal
pressure to clean the scales.
Dirty scales can lead to counting errors and, as a
consequence, to machine stoppages.
► Clean the incremental scales (1) of the Y axes with a
lint-free cloth soaked in ethanol.
► Clean the magnetic surfaces of the X
-
(1) and Y
axis (2) thoroughly over their entire length. Use a lint-
free cloth to remove any dirt from the magnetic
surfaces. Where necessary, remove components
with a non-magnetic tool.Where necessary, remove
components with a non-magnetic tool.
► In the event of damage or other problems, please
contact your SIPLACE Service team in Munich.
Minor Maintenance
Consumables, Spare and Wear Parts, Tools Maintenance Tasks for Optical Systems
Maintenance Manual SIPLACE X Series 45
Maintenance Tasks for Optical Systems
4.6 Maintenance Tasks for Optical Systems
Consumables, Spare and Wear Parts, Tools
4.6.1 Consumables, Spare and Wear Parts, Tools
▪ Microfiber cloth for cleaning optical assemblies
▪ ESD wristband [00320279-xx]
▪ Cotton gloves [00359087-xx]
Preparatory Steps
4.6.2 Preparatory Steps
► Switch off the machine, disconnect it from the power supply and secure it to prevent unauthorized
reactivation. Observe the instructions in section "1.2 Preparatory Work..." [ ➙ 11].
Performing Maintenance Tasks
4.6.3 Performing Maintenance Tasks
Cleaning the IC and FC ca meras
4.6.3.1 Cleaning the IC and FC cameras
NOTICE
IC- and FC camera
This cleaning procedure is the same for IC and FC cameras, as well as for types 25 and 33.
CAUTION
Risk of cutting
There is a risk of cutting your fingers along the edges of the mirror.
► Wear cotton gloves as protection and avoid touching the edges. The cotton gloves are also
required for effective cleaning (to avoid fingerprints!).
CAUTION
Voltages
Make sure that the electrical components are not live!
► Carefully lift the upper section (1) of the IC camera up
and off.